Bogged
31-10-2011, 11:42 AM
http://www.omix-ada.com/images/item/normal/11541.01.jpg
Aluminium Winch Bumper $1199.73
http://www.omix-ada.com/images/item/normal/11541.10.jpg
Stubby End Caps $311.88
http://www.omix-ada.com/images/item/normal/11541.13.jpg
Winch mount to suit: $287.88
http://www.omix-ada.com/images/item/normal/11541.14.jpg
Overrider hoop $203.88
Designed to be a whole new look while being extremely light weight.
Save on fuel and the environment. The Bumper is all Aluminum but
uses the current steel XHD D-rings. Each bumper comes with a built in
top filler plate. Each new XHD has cutouts and mounting points for the
factory fog lights and a great looking “Jeep® Style” front slat look that
will make this bumper stand out. If you want to run a winch, simply
remove the filler plate and attach the optional JK Winch mounting
plate (Steel Plate).The XHD Aluminum bumper is approximately
80lbs+ lighter than the average steel off road bumper. Government
studies show a fuel economy benefit of 2% for every 100lbs of weight
savings.**
Available Components:
• Aluminum Center Section with Steel D-Rings
• Stubby Bumper Ends - Aluminum
• JK Winch Plate - Special design for this bumper & fits all standard bottom
mount winches
• Special Aluminum Over-rider with forward slope
**http://www.fueleconomy.gov/feg/driveHabits.shtml
**http://www.fueleconomy.gov/feg/driveHabits.shtml
Due in stock November 28, 2011.
Just How Light is the Aluminum XHD Bumper?
Front Bumper Weight
Aluminum XHD - Standard Configuration* 26.9lbs
OE Bumper 35.7lbs
Brand X Off Road Bumper 110lbs & Up
*Standard Configuration: Bumper Base, Filler Plate & D-Rings. The optional Hoop Over-rider, Stubby
Ends & Winch Plate make the maximum overall weight of the bumper 62.6lbs.
Rear Pods:
http://www.omix-ada.com/images/item/normal/11547.01.jpg
Aluminium Rear Pods: $900.38
http://www.omix-ada.com/images/item/normal/11547.10.jpg
Rear Step to suit: $335.88
Taking the light weight theme further, we have developed steel inner
framed Aluminum Rear Bumper Pods. These new lightweight Pods
still allow for over sized tires but take a huge chunk of weight out
of the bumper. (The picture shows the rear pods installed with the
enclosed steel D rings for the XHD Rear Tire Carrier). Each Pod can be
used with tire carrier part #11546.20 to hang those 35”+ tires, shown
in picture with the optional center step. The XHD Aluminum bumper
pods are approximately 40lbs+ lighter than the average steel off road
bumper. Government studies show a fuel economy benefit of 2% for
every 100lbs of weight savings.
Just How Light is the Aluminum XHD Rear Bumper?
Rear Bumper Weight
Aluminum XHD - Standard Configuration* 43.45lbs
OE Plastic Bumper Cover 16.5lbs
Brand X Off Road Bumper 85lbs & Up
*Standard Configuration: Pods, Brackets & D-Rings. The optional Step adds an additional 6lbs.
Aluminium Winch Bumper $1199.73
http://www.omix-ada.com/images/item/normal/11541.10.jpg
Stubby End Caps $311.88
http://www.omix-ada.com/images/item/normal/11541.13.jpg
Winch mount to suit: $287.88
http://www.omix-ada.com/images/item/normal/11541.14.jpg
Overrider hoop $203.88
Designed to be a whole new look while being extremely light weight.
Save on fuel and the environment. The Bumper is all Aluminum but
uses the current steel XHD D-rings. Each bumper comes with a built in
top filler plate. Each new XHD has cutouts and mounting points for the
factory fog lights and a great looking “Jeep® Style” front slat look that
will make this bumper stand out. If you want to run a winch, simply
remove the filler plate and attach the optional JK Winch mounting
plate (Steel Plate).The XHD Aluminum bumper is approximately
80lbs+ lighter than the average steel off road bumper. Government
studies show a fuel economy benefit of 2% for every 100lbs of weight
savings.**
Available Components:
• Aluminum Center Section with Steel D-Rings
• Stubby Bumper Ends - Aluminum
• JK Winch Plate - Special design for this bumper & fits all standard bottom
mount winches
• Special Aluminum Over-rider with forward slope
**http://www.fueleconomy.gov/feg/driveHabits.shtml
**http://www.fueleconomy.gov/feg/driveHabits.shtml
Due in stock November 28, 2011.
Just How Light is the Aluminum XHD Bumper?
Front Bumper Weight
Aluminum XHD - Standard Configuration* 26.9lbs
OE Bumper 35.7lbs
Brand X Off Road Bumper 110lbs & Up
*Standard Configuration: Bumper Base, Filler Plate & D-Rings. The optional Hoop Over-rider, Stubby
Ends & Winch Plate make the maximum overall weight of the bumper 62.6lbs.
Rear Pods:
http://www.omix-ada.com/images/item/normal/11547.01.jpg
Aluminium Rear Pods: $900.38
http://www.omix-ada.com/images/item/normal/11547.10.jpg
Rear Step to suit: $335.88
Taking the light weight theme further, we have developed steel inner
framed Aluminum Rear Bumper Pods. These new lightweight Pods
still allow for over sized tires but take a huge chunk of weight out
of the bumper. (The picture shows the rear pods installed with the
enclosed steel D rings for the XHD Rear Tire Carrier). Each Pod can be
used with tire carrier part #11546.20 to hang those 35”+ tires, shown
in picture with the optional center step. The XHD Aluminum bumper
pods are approximately 40lbs+ lighter than the average steel off road
bumper. Government studies show a fuel economy benefit of 2% for
every 100lbs of weight savings.
Just How Light is the Aluminum XHD Rear Bumper?
Rear Bumper Weight
Aluminum XHD - Standard Configuration* 43.45lbs
OE Plastic Bumper Cover 16.5lbs
Brand X Off Road Bumper 85lbs & Up
*Standard Configuration: Pods, Brackets & D-Rings. The optional Step adds an additional 6lbs.
