Preparations

[Wooders]

So what else do you plan to do before Jamboree?

Me:

Grind about ½" from my rear lower spring perch.
Gring about ½" from the ends of my ARB bumper for tyre clearance.
Re-wire my AM CB - It's there just incase - moe than likely someone will only have AM...
Replace rear pinion unijoint.
Re-grease my control arms
Re-locate my winch plug outlet.
Paint R/C Jeep :D

[mattc]

Wash my jeep! :D

[billsta]

oh snap...
almost forgot to grease all those nipples. :D

oh, just a small list,
me,
install that 60 rear,
44 front, both with lockers and 4,56 ratios,
the special under drive,
8" lift,
long arms,
36 TSL SX,
rear bar work,
exo cage,
warn hub kit,
agg pipe snorkel,
and wake the hell up..
:D :D

real list
proberly rear shocks,
rotate the tires,
greasy nipples,
cut some part off the front,
washer bottle,
vacuum,
wash n wax,
wire spot lights, (done today)
kiss gold fish good bye..

hey wooders, shouldnt this be at the general section tongue.gif

[ 25 September 2002, 08:34 PM: Message edited by: billsta ]

[Wooders]

Originally posted by billsta:
hey wooders, shouldnt this be at the general section tongue.gif <font size="2" face="Verdana, Helvetica, sans-serif">NOPE - Because I started talking about MY TJ tongue.gif

[zzzz]

here is mine:

4.56 ratios and detroits front and rear - done
mount hand throttle properly - done
new 2.5" straight through muffler - done
mount CB properly - done
home brew air intake insulation - done
fit rear work light in place of stock red fog lamp - done

things still left to do:

SYE and CV driveshaft - can't get them in time
corner guards - on there way
make brake line extension brackets
grind spring perches - inspiration by wooders post
mount external CB speaker - got to find one
mount remote CB base unit somewhere
rip out sound insulation from bonnet - done
grease everything in sight
tighten all bolts I can lay a wrench on
flush mount tail lights
get my wheels mounted on shanes beadlocks - fat chance smile.gif

and there are plenty more that I will think of as well....wish I had a garage :( oh well

[Jimmyb]

smile.gif swap bullbar over (done yesterday)
smile.gif get wheel alignment done (got done 2 days ago but they stuffed it)
smile.gif wash and wax
smile.gif pick up kimberly kamper
smile.gif burn some cdz for the trip down

[billsta]

Originally posted by Wooders:
NOPE - Because I started talking about MY TJ tongue.gif <font size="2" face="Verdana, Helvetica, sans-serif">thats right, imtalking about my TJ as well :rolleyes:

do i have a TJ??? :D

[Wooders]

We just thought you'd assumed custody over Gary's tongue.gif

[Coops]

Thanks Wooders, after looking at this post on Friday I thought Cool I've got nothing to do...apart from put the Diff guard on.

Saturday Morning doin a bit of cleaning and painting under the TJ and hang on whats this oil on the underside of the Body???

Seems I have a leaky seal in the transfer case and it is travelling down the SYE and spraying out of the uni joint at the top of the drive shaft..... :confused:

Most likely got some dirt in it somehow, so now I have to pull it apart on Tuesday and fix it.

Its a Jeep thing and I understand.............

[billsta]

Originally posted by Coops:
Saturday Morning doin a bit of cleaning and painting under the TJ and hang on whats this oil on the underside of the Body???<font size="2" face="Verdana, Helvetica, sans-serif">cheap rust proofing..

nar wooders, garry's TJ is for shopping only :D

[Wooders]

Bugger I didn't get one thing done on my "toDo" list over the weekend....but at least I got the trailer pretty much packed :D :D