Brettski
29-04-2007, 11:52 AM
Thought I'd post this thread because in a couple of years someone is going to ask this question and no-one will have the answers. It will probably be me trying to compare lift kits... ;-)
I've measured from the ground, across the centre point of the wheel to the lowest point on the flares - they slope downward slightly as they head from the outside to the inside of the car. Just to clarify - I didn't measure to the outside point of the flare, but the lowest point.
On a stock 2-door Rubicon with about 3/4 tank of fuel, I get the following heights:
Front: 895 mm
Rear: 915 mm
B.
I've measured from the ground, across the centre point of the wheel to the lowest point on the flares - they slope downward slightly as they head from the outside to the inside of the car. Just to clarify - I didn't measure to the outside point of the flare, but the lowest point.
On a stock 2-door Rubicon with about 3/4 tank of fuel, I get the following heights:
Front: 895 mm
Rear: 915 mm
B.
