Air lockers for Sahara

[Apollo]

I need some help here, i live South Africa and no one here can tell me what diffs are in the Sahara, Dana 44's 35's or 30's.

I have a V6 4 speed auto. I have ordered a front and rear ARB lockers for it but the agent dose not know the ARB part numbers or what the ratios of the diffs are.

Any help with the above will be much appreciated,

Thanks.

[Chad_TJ]

Hey mate i think if your sarharas are the same spec as our base model ( not rubicon) then you have a dana 35 front and a 44 rear, as for the ratios its either 3.21 or 4.11 couldnt tell you which one for sure. someone else might be able to help here.

[Kiwi Jeeper]

Have tried looking at the specifications on:

http://www.daimlerchrysler.co.za/Jeep_Interwoven/featuresites/Wrangler2007/

Also look at:

http://www.citizen.co.za/index/article.aspx?pDesc=40083,1,22

which says D30 front and D44 rear on an Unlimited Sahara

Otherwise ask the dealer where you bought it from for the build sheet, which basically lists everything and anything you want to know about your particular Jeep.

[Apollo]

Well i still have no luck with the two lockers. The ARB agent here in South Africa has mailed ARB in Aus and still no word??

The info that was found on the net at[URL=http://www.jeephorizons.com/news/arb_jk_locker_062507.html[/URL] said use the RD100 front and the RD117 rear.

The thing is they do fit but they are about 5mm short in the bearing housings and are about 10mm shorter over all than the original diff thats in there now.

Has any other JK drivers installed the air lockers? Did you need to make up two spacers or are there new air lockers for the Dina diff in the JK?

Many thanks.