The JK Robicon project supported by 4WDUSA

[madog]

Hello Everyone

I finally done the Lift thing or is it the Jeep thing.....

Work performed by "www.4wdusa.com.au (http://www.4wdusa.com.au)"
Rancho 4" Long Arm
Rancho 9000XL adjustable shocks
Bushwaker 7" Flares
10x16 Procomp Wheels
35" Procomp tyres
Rancho Exhaust system
Rancho Diff rock gaurds
Bestop High Rock bumpers front and rear
Warn M6000 electric winch
5.13 diff ratio
Ected front electric diff locker
Power Lock auto geared rear diff locker

before shot
http://www.4wdusa.com.au/Images/Gallery/Project1/OldJeep2.JPG

The After Shots
http://www.4wdusa.com.au/Images/Gallery/Project1/NewJeep1.JPG

http://www.4wdusa.com.au/Images/Gallery/Project1/NewJeep2.JPG
The Jeep at home in its natural habitat...............
http://www.4wdusa.com.au/Images/Gallery/Project1/NewJeep3.JPG

Check the project that 4WDUSA completed on the JK over 4 days http://www.4wdusa.com.au/project1.html (http://www.4wdusa.com.au/project1.html)

regards
Robby

[Red-TJ]

Thats a BEAST

[madog]

Yes, it is quite a bit wider and higher. The misses bitches every time she gets in and out of the Jeep because of its height.

[Red-TJ]

The misses bitches every time she gets in and out of the Jeep because of its height.

Yeah I laugh when my niece and nephew try to get into my Jeep.
Especially when my 7yo niece look's at me with her hand's on her hip's and say's ... Don't be stupid I cant get up there

[oscar_the_grouch]

should of gotten an AEV hood too while yo were there

[burnz]

Man, that looks awesome and will be unstopable. Might need to mod the front bar to suit the flares tho, shouldnt be too hard.

[Barefoot]

Sweet as 8-)

[Jeff]

That right there is motivation for me to get a JK someday. Impressive.

[tonkatoy]

That is one SEXY BEAST! Love it.

[tonkatoy]

Can I ask for some underbody shots? I want to have a look it the LA kit.

[killa]

Can I ask for some underbody shots? I want to have a look it the LA kit.
Click on the Link in the first post.

Looks AWESOME Robby, come a long way since the Muster ;)

[Sevone]

it's taken a while - but thats a JK I like!

Well done - function & fashion!

[Maz]

sweet looking rig. Well done.

Not sure about the Bushwacker's. They are yet to win me over on Jk's just like the Tj's. Just too damn big. Are there any other options for extended flares beside them?

[jeep_boy]

that enough to pitch a tent in a blokes pants

[North Coast Wrangler]

looks great mate, might i suggest you block out your number plates on your own website as well though?

[lovemewrangler]

BEAUtiful just beautiful....

[Tiny]

sweet looking rig. Well done.

Not sure about the Bushwacker's. They are yet to win me over on Jk's just like the Tj's. Just too damn big. Are there any other options for extended flares beside them?

xenon make a 7 inch for the jk in a couple of styles

veery nice job looks sweet well done

[ASH79]

Madog That looks awesome hey! a fair bit bigger now than when you brought it down here! What a transformation ;)

[Mojotec]

Me Likey Likey!

[madog]

sweet looking rig. Well done.

Not sure about the Bushwacker's. They are yet to win me over on Jk's just like the Tj's. Just too damn big. Are there any other options for extended flares beside them?

not if you want to cover the 10x16 wheels. Only Bushwacker as far as I know cater for a 7" body flare. Here in WA the cops will write you a yellow sticker very quickly. The 8x16 wheels would have been ok with another make of flare but I had my mind set on 10x16. I take my hat off to the 4WDUSA boys, they know their stuff. :)

[madog]

Madog That looks awesome hey! a fair bit bigger now than when you brought it down here! What a transformation ;)

I'll be seening you soon in Albany again Ash. I am itching to play in some of those huge ass dunes again.:D

[the spambulance]

hey madog nice jk you have there good to see one that is getting some
decent suspension,gear ratios and lockers , looks like it will work well offroad .

why did you use a 6000 pound winch instead of a larger winch ?

flexytj

[ksk]

I wanna know what the damage was at 4WD USA...they arent the cheapest out there...
awesome looking rig tho mate,

KSK

[arzzs]

why did you use a 6000 pound winch instead of a larger winch ?

flexytj

Second That.

[Simsy85]

:O OMG I LOVE IT

How much we talking?

[Fat Chili]

Madog - By the looks of this pic you have to remove the rear truss to remove the Rancho diff cover, is that correct? Doesn't look like it can be removed any other way due to the tabs surrounding the fins on both sides of the diff cover? :confused:

http://img.photobucket.com/albums/v202/ausjeep/JKRancho.jpg

[madog]

hey madog nice jk you have there good to see one that is getting some
decent suspension,gear ratios and lockers , looks like it will work well offroad .

why did you use a 6000 pound winch instead of a larger winch ?

flexytj

Hey Flexy,

I wanted something slimline that does have winching power and that does not restrict the path of the airflow through the front grill that much. JK's get damn hot on slow crawling trails. The winch pulls 2720KG single line (5440Kg on a double pull) and the Jeep now sits on about 2300Kg. The M6000 is one of the most common used winches in offroad sport racing due to its lighter weight , average power, slimline and cheaper than most. I could have gone for the Warn power house but felt it was an overkill for me. I just wanted a winch between my Jk and Misses TJ when we want to venture offroad alone together.

[madog]

Madog - By the looks of this pic you have to remove the rear truss to remove the Rancho diff cover, is that correct? Or will it slide out and away once the three truss/diff cover bolts are removed? :confused:

http://img.photobucket.com/albums/v202/ausjeep/JKRancho.jpg
The small brackets on either side get unbolted with the Cover bolts and the truss remains fixed and untouched. But, the JK has a drain plug hole on the underside of the diff preventing the cover from being removed for oil changes. The cover has a main fill hole and a over flow hole as well.

[the spambulance]

Hey Flexy,

I wanted something slimline that does have winching power and that does not restrict the path of the airflow through the front grill that much. JK's get damn hot on slow crawling trails. The winch pulls 2720KG single line (5440Kg on a double pull) and the Jeep now sits on about 2300Kg. The M6000 is one of the most common used winches in offroad sport racing due to its lighter weight , average power, slimline and cheaper than most. I could have gone for the Warn power house but felt it was an overkill for me. I just wanted a winch between my Jk and Misses TJ when we want to venture offroad alone together.

cool just asking , cause i never seen one around here on anything bigger than
a zook . most guys go 8000pound + winches . different horses for horses for courses i guess .

[Fat Chili]

The small brackets on either side get unbolted with the Cover bolts and the truss remains fixed and untouched. But, the JK has a drain plug hole on the underside of the diff preventing the cover from being removed for oil changes. The cover has a main fill hole and a over flow hole as well.

Cool, didn't know they had a seperate drain but now I know that I can see it on the lower right of the diff centre. http://img.photobucket.com/albums/v202/ausjeep/EMOTICONS/2thumbsup.gif

[madog]

I wanna know what the damage was at 4WD USA...they arent the cheapest out there...
awesome looking rig tho mate,

KSK

Hi there,:)

Jeep modification can be costly in many ways after all JEEP does stand for Just Empty Every Pocket. The lift and mods did cost me a few grand but well spent I think with the right Supplier and installer for the product that I chose. 4WD USA like other companies of similar size have company overheads with staff salaries, etc. I feel they give me straight up answers and advice and have given me great service to date. With JK's being so new to Oz I think 4WDUSA have the product modification and installation downpact,as I do know of 5 JK's, 2 and 4 door models that have been suspension modified by them. Rancho and Full Traction systems alike.

The expense now is not the modified JK but convincing my insurance company that I want to be insured for a Jeep that costs more than stock replacement. And that will be an ongoing expense.:D

[ksk]

They done a great job none the less....waiting for my tax return to get a few bits and pieces myself :rolleyes: ....looking fwd to seeing pics of that thing FLEX on the trails! ;)

KSK

[madog]

They done a great job none the less....waiting for my tax return to get a few bits and pieces myself :rolleyes: ....looking fwd to seeing pics of that thing FLEX on the trails! ;)

KSK

I'll keep you posted with pics as they come available.

[Donza]

seen ya round perth in the stocky then thought i noticed a bit of a height difference! lol Looks huge on the road mate. what sort of $$$ for all that?

[Jeddo]

amazing job mate. that's the nicest JK i've seen.
4WD USA and yourself have created art! thumbs up from me.

[Shauny B]

Hi there,
Crazzy looking rig, realy like what you did with the mud flaps, different.

[oscar_the_grouch]

Hi there,
Crazzy looking rig, realy like what you did with the mud flaps, different.

That would be the quick disco mud flaps 4wdusa sell. If it's the same as the TJ one

[MR EXTREME JEEP]

Looks good mate. Needs some sliders on it though.

[madog]

That would be the quick disco mud flaps 4wdusa sell. If it's the same as the TJ one

Yup those are the ones. They come with the built in bling mirror, just have to add your own vehicle logo. 4WDUSA have the JEEP stickers made to fit.

[madog]

Looks good mate. Needs some sliders on it though.

Hi there,

I would have but the Misses is already bitching about the height and sore knee getting in and out so the steps will have to stay for a while. I've been plenty rockcrawling with it and have not bumped them yet. I was thinking of eventualy getting the sliders and then putting the Bestop electric steps on that 4WDUSA sell.



Robby

[jeep_boy]

everytime i see that i think now thats nice, question what did you do to the bonnet, you got any closer pics of it

[madog]

everytime i see that i think now thats nice, question what did you do to the bonnet, you got any closer pics of it

Go to the BESTOP website below and that is the product I have mounted on my hood. it is called a "Hood Applique". Just a little something to break the look of that wide bonnet.

http://www.bestop.com/index.php?s=64

[silver_jk]

just a suggestion from my own experence turn the back shocks around the adj knobs on the rancho's break off real easy mine did. I've now gone for the in cab kit and a new pair for the back on my jk turned around of course ;) one very sweet jk yours is

[silver_jk]

Hi there,:)

Jeep modification can be costly in many ways after all JEEP does stand for Just Empty Every Pocket. The lift and mods did cost me a few grand but well spent I think with the right Supplier and installer for the product that I chose. 4WD USA like other companies of similar size have company overheads with staff salaries, etc. I feel they give me straight up answers and advice and have given me great service to date. With JK's being so new to Oz I think 4WDUSA have the product modification and installation downpact,as I do know of 5 JK's, 2 and 4 door models that have been suspension modified by them. Rancho and Full Traction systems alike.

The expense now is not the modified JK but convincing my insurance company that I want to be insured for a Jeep that costs more than stock replacement. And that will be an ongoing expense.:D

if ya a mamber of a 4wd club try tcis they insure my jk i had the same deal mods more than a 1/3 of the cars "2nd handsell price in 4 weeks they said it was only worth 37 g for a rubicon i then told them find me one for that and ill take it ;) " this was when/still the long wait and delays 4 mnths for mine to get here. when it was a month old and all the bits had been added to it even though the insurance company i was with was a 2 yr new car replacement :hammer:

[madog]

Hi Silver,

I agree on the shocky adjuster breaking off, thats why it was installed facing rear. I am thinking of the new digital in-car shock adjuster from Rancho , yet to be released. it was shown at the last SEMA show in Vegas and was impressive. I ended going with SGIO on insurance who gave me an agreed amount well over $44000 to cover my bank repayment and extras on the Jeep. They covered me for complete off-road except when in a competition / race. TCIS came in at $37000 as well and would not budge.

Regards
Robby

[silver_jk]

Hi Silver,

I agree on the shocky adjuster breaking off, thats why it was installed facing rear. I am thinking of the new digital in-car shock adjuster from Rancho , yet to be released. it was shown at the last SEMA show in Vegas and was impressive. I ended going with SGIO on insurance who gave me an agreed amount well over $44000 to cover my bank repayment and extras on the Jeep. They covered me for complete off-road except when in a competition / race. TCIS came in at $37000 as well and would not budge.

Regards
Robby

minw were facing the way yours are out at the rear and thats why they broke off i now got the and kit (gague type) saw the digital after buyin mine :-( the front ones are fine no probls there teh back has the adg facing front ie protected better

love the long arm kit on yours sweet as mate **)

[Dave]

Looks great mate!

I was the waver on Sheperton this morning.

[madog]

Looks great mate!

I was the waver on Sheperton this morning.

:D Thanks Dave, we should meet up and do the powerlines some time.
Regards
MaDoG

[oscar_the_grouch]

Madog...saw ur jeep getin on the causeway also this morning. Was on the bus...also been seeing u gettin on the freeway ? via wellington street near harbour town.

[madog]

Madog...saw ur jeep getin on the causeway also this morning. Was on the bus...also been seeing u gettin on the freeway ? via wellington street near harbour town.
:D Hi Oscar,
Wave next time so I can ID you. I work in the Vicpark area.
Funny thing this evening at the IGA near my house. A lady and her young kid stopped traffic in the parking lot to get a good angle on the Jeep with her mobilephone to take pictures. The wife and myself were standing inside, in a queue, waiting to pay for our goods looking at this lady through the shop window. My wife pipes up " Oh! look babes, another person taking photos of the "wanker tank". Everyone who heard it cracked up with laughter. But she always takes the piss outa me as she herself drives a 2" lifted TJ Wrangler. One defenate way to piss off a female Jeep owner is to say "Cool Jeep , does it belong to your Husband":wall:

I'll have the JK polished and span for the Perth 4x4 show 14th Nov 2008. The Jeep will be at the 4WDUSA stand with other modified Jeeps on display. JK's and TJ's with 6" lifts , etc.

http://members.westnet.com.au/madog/images/Powerlines_20july08/DSCN4648.JPG

http://members.westnet.com.au/madog/images/Powerlines_20july08/DSCN4596.JPG

http://members.westnet.com.au/madog/images/Powerlines_20july08/DSCN4638.JPG

http://members.westnet.com.au/madog/images/Powerlines_20july08/DSCN4649.JPG

http://members.westnet.com.au/madog/images/Wandoo/DSC_0073_06152008_1091.JPG

[Donza]

Madog - powerline night trip next sat night, should bring the beast along...

[greenjk]

great looking jeep but i think the thing on the bonnet makes it look like a hummer bonnet, don't want to offend,just my opinion

[Maz]

great looking jeep but i think the thing on the bonnet makes it look like a hummer bonnet, don't want to offend,just my opinion

Agree with ya. Although an AEV bonnet would fix that pretty quick and look good. :lol:

[greenjk]

I love the look of the AEV bonnet but i wonder how much water they would let thru

[ARB87U]

maybe you could suggest to 4WDUSA that they support the AJOR forum, your post is one giant bloody advertisement. Could you have referenced them or gotten more plugs into your posts?

i know they did the work, and kudos, but they don't support this forum. As such we should not support them.....

[JasperJ]

maybe you could suggest to 4WDUSA that they support the AJOR forum, your post is one giant bloody advertisement. Could you have referenced them or gotten more plugs into your posts?

i know they did the work, and kudos, but they don't support this forum. As such we should not support them.....

Hmmm funny how they show up on the sponsor page then.....

[ARB87U]

that would be the whole USA4x4 and 4WDUSA thing......

FYI: different companies, owners and geographic location.....

[JasperJ]

that would be the whole USA4x4 and 4WDUSA thing......

FYI: different companies, owners and geographic location.....

Ok cool, didn't know that, I'll just drink my cup of "shut the fick up" and go and sit quietly in the corner.

[madog]

Madog - powerline night trip next sat night, should bring the beast along...

:D Stop teasing Donza, Over the next 3 weekends I've got to move into our newly built house, paint, Clean up the rental property, etc...

I will most defenatly take you up on a night trip in a couple of weeks from now as I need the practice for the WA 4WD Association Interclub Night Navigation Event Sat 13th Sept 2008 http://www.wa4wda.com.au/. The Jeep muster in Harvey will be happening as well if you want to come.(Friday 26th September ~ Monday 29th September)

[madog]

maybe you could suggest to 4WDUSA that they support the AJOR forum, your post is one giant bloody advertisement. Could you have referenced them or gotten more plugs into your posts?

i know they did the work, and kudos, but they don't support this forum. As such we should not support them.....

:D Go ARB87U, throw your toys out of your cot. You obviously have issues with 4WDUSA, please take it up with them.

Best Regard

DoNotGiveAshitDepartment.

[madog]

great looking jeep but i think the thing on the bonnet makes it look like a hummer bonnet, don't want to offend,just my opinion

none taken Green :), I also think the AEV bonnet would let some water through on the vents. But I must agree that it does look good.
https://secure.aev-conversions.com/store/graphics/00000001/40303001AA.jpghttps://secure.aev-conversions.com/store/graphics/00000001/4030600.jpg

[ASH79]

The Jeep muster in Harvey will be happening as well if you want to come.(Friday 26th September ~ Monday 29th September)

I am so there! Bring it on **) We'll have to be doing some runs prior to the event

[Jeepology]

Looks great, nice one

[Jeeptheone]

madog,

What did you do to get your steering stabiliser to sit higher up and on the other side of the vehicle???

JTO

[azasjeep]

:D Go ARB87U, throw your toys out of your cot. You obviously have issues with 4WDUSA, please take it up with them.

Best Regard

DoNotGiveAshitDepartment.

I dont think he has a problem but i guess like me he figures with a 5 page add like this they could throw the forum a few bucks and sponsor the site.

[Maz]

maybe you could suggest to 4WDUSA that they support the AJOR forum, your post is one giant bloody advertisement. Could you have referenced them or gotten more plugs into your posts?

i know they did the work, and kudos, but they don't support this forum. As such we should not support them.....

It poses a good question. Did 4wdUSA give you a really good deal to plug them on here or are you just really happy with the service you got from them? :)

[madog]

It poses a good question. Did 4wdUSA give you a really good deal to plug them on here or are you just really happy with the service you got from them? :)


"yes, happy with the service I got from them". But it is not about them,it could have been anyone who done the job right by me on my vehicle and I would have still said what I said on this thread. I am just self impressed with the JK comparing it to how it performed stock and the capabilty it has now. 4wdUSA have no knowlege of my thread or any self input/plug into my postings. When I said in my post about the Perth show, it was not to premote 4WDUSA but that my vehicle would be on display there. azasjeep, you pose a good view to the argument and I will put it to 4wdUSA about AJOR sponsorship. My intensions are clean and all I wanted to do was post my Jeep under "Jeep Build Up" and show Oz what people are doing with the stock Jk's. Obviously I have put a few people noses out of joint as with the title to my thread, so I will answer one last post and then resign myself from this thread.

Regards
Madog :)

[madog]

madog,

What did you do to get your steering stabiliser to sit higher up and on the other side of the vehicle???

JTO

Hi Jeeptheone

The stabaliser is currently in a temporary postion until the new 4" right-hand drive pitman arm arrives. The arm will be specialy designed to accomodate the steering stabaliser which will go from the pitman arm to the passenger side chasis. This will put the stabaliser higher up to the right and behind the front bumper away from all other moving parts. The stabaliser mounted as in my picture is practical for road use but will get knocked by the panard bracket when the Jeep bottoms out as I have found out. There is still more work I want to have done on the Jeep but that will be posted else where.

I hope that answers your question, Regards
Madog :)

[azasjeep]

"yes, happy with the service I got from them". But it is not about them,it could have been anyone who done the job right by me on my vehicle and I would have still said what I said on this thread. I am just self impressed with the JK comparing it to how it performed stock and the capabilty it has now. 4wdUSA have no knowlege of my thread or any self input/plug into my postings. When I said in my post about the Perth show, it was not to premote 4WDUSA but that my vehicle would be on display there. azasjeep, you pose a good view to the argument and I will put it to 4wdUSA about AJOR sponsorship. My intensions are clean and all I wanted to do was post my Jeep under "Jeep Build Up" and show Oz what people are doing with the stock Jk's. Obviously I have put a few people noses out of joint as with the title to my thread, so I will answer one last post and then resign myself from this thread.

Regards
Madog :)

no arguament dude, keep updating the thread its a top jeep you have built.

[Maz]

"yes, happy with the service I got from them". But it is not about them,it could have been anyone who done the job right by me on my vehicle and I would have still said what I said on this thread. I am just self impressed with the JK comparing it to how it performed stock and the capabilty it has now. 4wdUSA have no knowlege of my thread or any self input/plug into my postings. When I said in my post about the Perth show, it was not to premote 4WDUSA but that my vehicle would be on display there. azasjeep, you pose a good view to the argument and I will put it to 4wdUSA about AJOR sponsorship. My intensions are clean and all I wanted to do was post my Jeep under "Jeep Build Up" and show Oz what people are doing with the stock Jk's. Obviously I have put a few people noses out of joint as with the title to my thread, so I will answer one last post and then resign myself from this thread.

Regards
Madog :)

No need to resign yourself from the thread. ;) Its a great read and well done on your buildup. It's a great rig. :D

ARB87U bought the question up and you have explained your situation well. Cant ask for more than that.

[DrewTJ]

maybe you could suggest to 4WDUSA that they support the AJOR forum, your post is one giant bloody advertisement. Could you have referenced them or gotten more plugs into your posts?

i know they did the work, and kudos, but they don't support this forum. As such we should not support them.....

Who gives a Sh!t. I really think people have better things to do.

[ARB87U]

Who gives a Sh!t. I really think people have better things to do.

Talk about a self centered cave dwelling throwback.... ******** me......

It is a specialist jeep store/workshop, here we have a dedicated specialist jeep forum, i did give the guy kudos, i said it looked like a good build, i 'suggested' that he have a word to them and 'suggest' they support the forum. My beef was and is that it is super heavily promoted in this thread, potentially bringing $$$ to them, with no return to the forum, it has gota be the last jeep specialist in the country to have not signed on the sponsor the forum. Everyone wants something for nothing nowadays, what is the world coming to?

Not that i have not been here 100 times before, but the forum does not run for free, it has rather extensive resource requirements, these ARE NOT FREE. Sure you can login and sure it costs nothing 'to you', but that is not the case for the owners of the forum....

[DrewTJ]

Talk about a self centered cave dwelling throwback.... ******** me......

It is a specialist jeep store/workshop, here we have a dedicated specialist jeep forum, i did give the guy kudos, i said it looked like a good build, i 'suggested' that he have a word to them and 'suggest' they support the forum. My beef was and is that it is super heavily promoted in this thread, potentially bringing $$$ to them, with no return to the forum, it has gota be the last jeep specialist in the country to have not signed on the sponsor the forum. Everyone wants something for nothing nowadays, what is the world coming to?

Not that i have not been here 100 times before, but the forum does not run for free, it has rather extensive resource requirements, these ARE NOT FREE. Sure you can login and sure it costs nothing 'to you', but that is not the case for the owners of the forum....


I completely agree, i just believe that you (and in reflecting, probably myself) could have posted your opinion in a better light. Something along the lines of what you just wrote there, would have been great. :o

[DrewTJ]

"yes, happy with the service I got from them". But it is not about them,it could have been anyone who done the job right by me on my vehicle and I would have still said what I said on this thread. I am just self impressed with the JK comparing it to how it performed stock and the capabilty it has now. 4wdUSA have no knowlege of my thread or any self input/plug into my postings. When I said in my post about the Perth show, it was not to premote 4WDUSA but that my vehicle would be on display there. azasjeep, you pose a good view to the argument and I will put it to 4wdUSA about AJOR sponsorship. My intensions are clean and all I wanted to do was post my Jeep under "Jeep Build Up" and show Oz what people are doing with the stock Jk's. Obviously I have put a few people noses out of joint as with the title to my thread, so I will answer one last post and then resign myself from this thread.

Regards
Madog :)


He was just showing us his pride and joy, which happened to be done by someone other than i site sponsor and he gets roastered for it.

Not cool guys. But i also agree with you ARB87U about the sponsoring and the cycle that is. Lets not have a go at this guy. Innocent until proven.

[ksk]

The owner is vice president of the jeep club of WA, so he has vested intrests elsewhere....He is a very knowledgble guy but alot of ppl dont get along with him coz he is a bit rude. His prices arent the best either...jmho....His knowledge of Jeeps is very very good though....Bottom line is that if you have the $$$ he will build you a good jeep..

KSK

[ian]

nice rig.....good to see some built jks starting to show up.

[Sethgun]

madog, nice rig mate. Can you tell me how u have found those rancho RS9000XL shocks? Im looking to use them in my superlift kit and get the longarm shock models (the ones im sure u are running in there)

Are the shocks on the model u got actually the oversized ones? They only specify they are oversize on particular part numbers in the XL series and not all of them are larger diameters, so not sure about the ones you have. Apparently the oversized ones are just huuuuge compared to a normal shock. How do you find the ride in them, and differences in adjustment settings? Do you have the wireless controller for them or in cabin? Im in the process of getting all the info I can and seeing ur local with these, who better to ask :)

Also i noticed ur steering shock is relocated to the other side likethe yanks. Did that require welding a new mount ir does the relocation bracket from the US work fine on the other side of the diff?

Cheers mate

[SwAmP DonkEy]

nice rig mate it the only JK iv seen that i like looks mean. great work

[MR EXTREME JEEP]

Great build. Well done looks good except the bonnet. Too "hummerish"
I will also coment on the other topic that has infected this thread.
So fkn what?
Builder is not a sponsor.
He is no way obligated to sponsor AJOR because a build of his is featured here.
FFS this is a public PUBLIC OPEN forum.
He can post whatever the ****** he wants within the rules provided.
Rude prix!
Shoot him down and scare him off from posting in his own thread for fear of further prosecution. UNFKNBELIEVABLE.
Who gives you the right!?

[Ben]

So we can't mention non-sponsored products anymore?

All those discussions about Dana 60s, 44s, and shit better stop. Same with snorkels, and lifts? Pretty sure RE and Tera don't sponsor the site?

I'm with MR EJ on this one, it's an open forum. If he's happy with the service, why can't he say so? Or are we only allowed to submit paid advertorials?

[billsta]

6000lb winch? is that for loading the boat?

last 2 page is a good read :mrgreen: keep that shit going

[rustyjk]

sweet ride, hope to see it down albany way somtime

[Red-TJ]

I like the roller idea on the front bar

[Aaronsjeep]

From what i have heard, the load rating, although will take almost 6000 pound on a double line pull, when straining on rocks, or thick slop, load rating to the winch is alot higher than that, maybe thats where the 6000 pound will struggle, regardless awesome rig..

Keep posting mate, there will always be keyboard warriors having a go, with the protection of distance to their advantage.. Your jeep does all the talking for you.. :)

[RockyOne]

Amazing transformation and someone out there is so jealous;-) Love that link to 4WDUSA. Thanks to them for that fantastic series of pix of the workshop guys working through, what to me seems to be a major project..Looks like the westeners sure know how to 'mod' a Jeep.

[Shorey]

this is not the first time madog has tryed to use 4wd usa if he was not trying to get 4wd usa out there he shoud go back to all of his post and take 4wd usa out and so we can read them without the adds.

Shorey

[madog]

this is not the first time madog has tryed to use 4wd usa if he was not trying to get 4wd usa out there he shoud go back to all of his post and take 4wd usa out and so we can read them without the adds.

Shorey

Shorey,

This thread has been dead and forgotten for months. Everyone had their say and it is gone and dusted. You choose to have a fair go at me and 4WDUSA, again on a forum. Stop your digs at me or we will have a repeat of our last forum match!

Madog

[Davesjeep]

nice very nice, one problem... its not red...
lol

[Matty ducati]

Guys who cares, they are in WA, pretty much everyone over there knows about them. its not like they need the advertising! And yes i have met the guy and i am of the same opinion of most of the WA jeepin peps.
Nice build up by the way:)

[madog]

Quoted [nice very nice, one problem... its not red..]

My first choice of colour was the red rock pearl but I must say being sceptical about black, it does grow on you.

Quoted [ Nice build up by the way ]

Thanx Matty:)

[macca]

saw you yesterday man the car is lookin really good. sure made my wj look small.

[DIY]

4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA 4WDUSA
Looks shite hot well done .