View Full Version : i Got my AX10
09-08-2008, 05:56 PM
i picked up my AX10 on friday ripped it straight apart and put the locked in, 14 tooth gear, about to rip the foam out of tyres and put in some wheel weights :)
on a side note check ya front drive shaft grub screw on the motor end, they are notorious for coming loose.
09-08-2008, 07:03 PM
i use 150grams in each wheel and i had to loctite the grub screw
09-08-2008, 08:27 PM
yeah i found the stick on wheel weights fit snug around the inside of the rim! i only got about 50grams in each front, just to keep the front down a little, its just trial and error, i am going to make some front arms soon too
having heaps of fun already
10-08-2008, 03:18 AM
your pics stir me to get my crawler going again!
14-09-2008, 07:30 PM
Well i went out and spent some coin on the bent arms for the front and rear, i still got to get uppers and steering done but i am half way there!
Today whilst cleaning up the backyard i went to throw out one of the many trashed cars and it got me thinking......... a couple of hours later and vola
are you planing on droping the ride hieght? that would look great with a droop setup
14-09-2008, 07:54 PM
whats a droop setup dude?? i have been REALLY suprised with what it does after the arms and new body my brother has soft springs, drop shocks and heaps of mods and i keep up and some times go further
lowered suspension and internal springs in the shocks to limit the torque twist
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.