Next is uneek 4x4 bar and winch and CRDSTU suspention.Then the tyres and black rims .A company here in Toowoomba will do my custom snorkel when i ready . Looking forward to that being done also.oh and bash plates .👍👍👍👍

Looks good Baldy, nice job. It will be interesting to see how they do your snorkel when you do it.

I added to the existing cooling by cutting the hot side ATF line post tranny and pre factory ATF cooler. I connected the new coolers intake to the cut line that runs direct back to the tranny. The new coolers cool/out line was then connected to the factory line running into the factory ATF cooler. If you need a diagram sing out.

The after market fan hasn't been neccessary. The new cooler and increase in ATF alone seems to be adequate to keep tranny cool.

What have you done to your KK this week?
 

I’ve read that this gearbox does suffer as the design carries a low quantity of ATF, because of this there are aftermarket cast alloy sumps available that increase the capacity and have cooling fins to further assist.

https://uploads.tapatalk-cdn.com/201...76f170636e.jpghttps://uploads.tapatalk-cdn.com/201...c7144e2404.jpghttps://uploads.tapatalk-cdn.com/201...88993673dc.jpg

https://www.yourcovers.com/transpan_11044.php

Well i am getting their. Got the windows tinted today and set up the inside as a 2 person tourer. My CRDSTU suspention gets put in next friday and my Tyre Trek rear Tyre/2 jerry can holder bar should be here in the next week or so .
To do list still
Tyres
Snorkel
Bashplates
Uneek bar
Winch

Lightbar, Steel wheels and muddies...
http://members.iinet.net.au/~grsmith...dies1024-1.jpg

And the alloy roof tray is already off that X-Trail in the background. It doesn't fit the cross rails on the car, and I want to convert it to tracks anyway. It would be way too high on those cross rails for my short-arse stature.

http://members.iinet.net.au/~grsmith...dies1024-2.jpg

Lookin good Wiz .i take it those tyres are 245/75/16 ?