1997 Jeep Wrangler TJ
 

Asking Price: 8500

Make: Jeep

Model: Wrangler

Year: 1997

Condition: Used

Odometer KM: 130000

Rego State: Victoria

http://i328.photobucket.com/albums/l..._2918705_n.jpg

I thought this day would never happen but, it's finally come time to sell off my awesome TJ.
I've been living in the USA for the last 6 years, and I could use the funds for my JKU over here :)

It has been kept in a garage for the last 6 years and just needs a little TLC
You could easily turn this back into more of a road jeep, or you could go the other direction and turn it into a competition or hard core offroad weapon.

Selling without roadworthy at this stage, but it would be relatively easy to get this passed if you know what you are doing.

Citron/Army green color

New Radiator
New power steering box
New uni joints in axles and front/rear drive shafts
New Pinion seals
New rear drum brakes and shoes
New battery
Near new front disks and pads
New warn winch motor

Dana 30 front with 4.56 gears and detroit locker
Dana 44 rear with 4.56 ratios and detroit locker
Slip Yoke Eliminator with custom driveshafts
AX15 Manual - rebuilt once after 5th gear died on the freeway

4 of 35x12.5x15 Maxxis Creepy Crawlers
1 of 35x12.5x15 Simex Extreme trekker
15x8 King racing mechanical beadlocks
Warn 7" wide flares that fully cover tyres

Custom rear swing away tyre carrier
Custom high clearance fuel tank skid
Custom high clearance t-case skid
Custom steering box skid
Sleeved tie rod

Upgraded headlight wiring loom and bulbs
Lightforce RMDL170 spotlights
Flush mount tail lights
Vented hood

4" springs
Old Man Emu N66L/N67L long travel shocks
Teraflex lower control arms
Currie front upper control arms
ARB Rear track bar bracket
Modified front track bar bracket
Quick disconnects
2" body lift

Warn M8274 high mount with brand new motor
Synthetic rope

ARB Snorkel
62mm throttle body and spacer
Extractors and custom 2.5" high flow cat/muffler/piping
Hand throttle
Bikini top, Wind jammer, Tonneau cover
Soundbar
Bestop seat covers - well loved
Half doors

Loads of other little mods and stuff I can't remember

Just let me know if you have any questions...

A few more pictures from one of the last times it was out on the trails...

You can see the custom transfer case skid that sits flush with the frame rails in the front and lets you slide over obstacles without getting caught up
http://i328.photobucket.com/albums/l...1_950442_n.jpg

Custom rear tire carrier, bumper
http://i328.photobucket.com/albums/l...1_187482_n.jpg

Custom fuel tank skid - complete with a sticker that reads "Attach buggered toyota here" :D
http://i328.photobucket.com/albums/l..._1666723_n.jpg

Does it still have that special Gildo O/H console?
That would be a huge selling point!

I'll happily give you 10000 if you can get a rwc.

Do you want a matching rear seat?

It should be easy enough to get a RWC, if you ask around and find the right person :)
It has been registered before, and if you did a little TLC, and swapped wheels/tyres with someone it should be no drama at all.

My apologies, I am living out of the country and can't get that organised very easily these days.

Price dropped :D