|
Track bar install Question for everyone with adjustable track bars, when putting it in the car, do you just make it the same length as the stock one before install?
It’s going in a 2.5” lift so not sure if needs to be opened up a bit or not. Sent from my iPhone using Tapatalk |
A 2.5” lift normally fine with stock track bar. It’s all about centring the axle, so if the stock length works set it as that. If not, adjust accordingly.
|
Awesome thanks, I’ll line it up to stock and then go from there
Sent from my iPhone using Tapatalk |
Yep, start with stock length, then you can measure from the inside of the rim on each side to the top of the spring mounts & see if you need to make any adjustments.
|
| All times are GMT +10. The time now is 12:56 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com