AUSJEEPOFFROAD.COM - AJOR

AUSJEEPOFFROAD.COM - AJOR (http://www.ausjeepoffroad.com/forum/index.php)
-   Early Model Jeep (http://www.ausjeepoffroad.com/forum/forumdisplay.php?f=129)
-   -   amc edelbrock intake corrosion? (http://www.ausjeepoffroad.com/forum/showthread.php?t=151724)

xjgx 02-01-2018 05:10 PM

amc edelbrock intake corrosion?
 

Hi all,
does anyone have an edelbrock performer intake 2131 for amc off the engine to look inside the front water port to see if there is an inner wall blocking the port from under the thermostat housing. This old manifold looks to be corroded inside but im not sure why the inner wall is there, i thought the port should be completely open or is it an intended restriction or block off. (did edelbrock stuff this casting?) Anyone seen this before?
Thanks
<a href="https://ibb.co/cmmCew"><img src="https://preview.ibb.co/bFuLXG/intake.jpg" alt="intake" border="0"></a>

xjgx 03-01-2018 06:59 AM

all sorted. it is not supposed to be in there. was left over when it was cast.


All times are GMT +10. The time now is 01:25 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

AJOR 2002 - 2018 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.midlifemate.com wayalife.com jkwrangler.com ausjeepforum.com jk-forum.com canadianjeepoffroad.com cryptoprofitcalculator.net

vB Ad Management by =RedTyger=