AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand
Page 6 of 13 1 2 3 4 5 6 7 8 9 10 11 12 13
Show 40 post(s) from this thread on one page

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (https://www.ausjeepoffroad.com/forum/index.php)
-   ZJ WJ WG Grand Cherokee (https://www.ausjeepoffroad.com/forum/forumdisplay.php?f=130)
-   -   Jeep 2.7crd not starting (https://www.ausjeepoffroad.com/forum/showthread.php?t=154578)

Tinyprins 06-03-2019 10:51 PM
Quote:
Originally Posted by Jensjohnson (Post 1646942)
sounds like you have a problem getting power to the injectors. Does it start with easy start" ?
First shot then it runs

Sent from my GT-I9500 using Tapatalk

Jensjohnson 06-03-2019 11:14 PM
ok, so if you start it with easystart, then it runs good? and if you stop it and try to restart it when hot??

Tinyprins 08-03-2019 05:28 AM
Quote:
Originally Posted by Jensjohnson (Post 1646949)
ok, so if you start it with easystart, then it runs good? and if you stop it and try to restart it when hot??
Can drive it as far as i want ..but switch it off and try start it needs easy start again doesnt matter what temp its at

Sent from my GT-I9500 using Tapatalk

Tinyprins 08-03-2019 05:30 AM
Quote:
Originally Posted by Jensjohnson (Post 1646949)
ok, so if you start it with easystart, then it runs good? and if you stop it and try to restart it when hot??
No problems runs and drives normal no error codes nothing switch it off and 1 sec later try to start nothing its like the ecu does not pick up im trying to start it

Sent from my GT-I9500 using Tapatalk

JeanLuke 10-03-2019 03:31 PM
I went back through this thread and I couldn't see if you had monitored fuel rail pressure while attempting to start. Have you done this? It can give a clue where to start looking.

The other thing to monitor is ECU voltage when cranking.

Tinyprins 10-03-2019 05:22 PM
Quote:
Originally Posted by JeanLuke (Post 1647049)
I went back through this thread and I couldn't see if you had monitored fuel rail pressure while attempting to start. Have you done this? It can give a clue where to start looking.

The other thing to monitor is ECU voltage when cranking.
Ive done the fuel pressure monitor the other day very bad max 80bar on crank

Sent from my GT-I9500 using Tapatalk

Tinyprins 10-03-2019 05:24 PM
Heres the resulthttps://uploads.tapatalk-cdn.com/201...dffc8ff060.jpghttps://uploads.tapatalk-cdn.com/201...998f451255.jpghttps://uploads.tapatalk-cdn.com/201...343f3763d4.jpg

Sent from my GT-I9500 using Tapatalk


All times are GMT +10. The time now is 02:37 AM.
Page 6 of 13 1 2 3 4 5 6 7 8 9 10 11 12 13
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com

vB Ad Management by =RedTyger=