Looking for fuel line p/n
 

Hey gents,

I'm sick of the feed lines in and out of the filter leaking, I had replaced them a while ago with new hose off the roll, but I am not keen on it.

Can anyone please confirm the part numbers I need? One is a short 90 degree hose about 3" long x 2", the other has composite bends, probably a bit over 12" long, and has a protective case around it.

It would seem the long one is specific to whether or not the vehicle has a water sensor in the filter, but I am struggling to work out which one is which!!

Oh, diesel of course!

Cheers,

Rob.

http://www.ausjeepoffroad.com/forum/...1&d=1530140089

1  Sensor fuel/water 05117542AA


2  Bracket 05175595AA


3  Clamp 05175594AA


4 Tube fuel return includes elbow fitting 05175807AA


5  Bracket 05175596AA


6  Filter fuel 05175429AB


7 Hose fuel 05175593AA


8  Tube fuel 05175592AA


9  Clamp 05080439AB


10  Tube fuel 05175591AA


11  Hose fuel filter this is the rubber hose off the corner of the injection pump 68003484AA

Search "Lines Filter, Fuel Injector 3.0L [EXL]" on google

https://varuosad.alvadi.ee/ee/vin/1J...er/11655/29918

I have just had the same trouble as Rob but from the diagram I am still not sure which hoses/part numbers I require. possibly No.11 and either 8 or 10?
The hoses seem to go soft and get enlarged where they join the filter.

Cheers

Dave

I am hoping to order the MB equivalent parts from the USA. Interestingly enough they are reasonably priced, including a genuine MB fuel filter.

Problem I have encountered is the long hose has to options. See below link. Any ideas gents?

https://www.pelicanparts.com/catalog...L_pg1.htm#item

If you are talking about part 11 filter to pump yes there are 2 part numbers, the one I listed is pre 2007

P/N after 2007 68003484AB
P/N before 2007 68003484AA

When I look at my 09 and compare it to my 06 I cant see anything different :roll:

Can't help with Merc numbers sorry.

I am getting my head around it. The Bluetec Mercs have a U41 option code. My guess is it's the non Bluetec code.

Yes I'd say your right, even the injectors are different on a bluetec OM642