Looks like the wrench I caught the apprentice using a few times, only the hammers missing !!!
|
Pete and Scotty are running the HHP rear mount in their WH/XH's. It will be what i replace mine with as well.
In petes he replaced the front shaft with a DC-uni shaft, and by using the HHP bushing stopped a vibration he had under load and takeoff as the front diff couldnt rotate and cause pinion alignment issues. I destroy factory bushings every second trip thats why im changing to one lol. Great info as always Clarky! |
Quote:
http://www.jeeperf.com/#!product-pag...f-2a85b377b2d4 VP, Pete or Scotty, how firm/tight are the HHP ones in the diff housing? Do you need to press them in? Did you only replace the pinion one or both? |
After a bit of deliberation I went ahead & purchased the Jeeperf (standard) set (all 3) for $350au.
I was convinced the HHT were the go after I spoke to drj33p but the fact that they are designed for on road use not dirt swayed me to the Jeeperf ones. Once fitted I will report back. |
Good stuff Clarky. Well worth it. I only replaced mine on the top of the diff recently for the second time.
|
11 days after Jeeperf posted the bush's they arrived. Very solid looking,
http://www.ausjeepoffroad.com/forum/...76e15918f7.jpghttp://www.ausjeepoffroad.com/forum/...76e4e5b74f.jpg now to find the time to fit:D |
Nice.
Are you fitting them yourself or getting it done? HB |
All times are GMT +10. The time now is 06:34 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com