I swapped mine in 1 minute when I dropped the diff. Just used the right socket to punch the old one out and the right socket to punch the new one in. But dropping the diff takes time. Still quicker than when I changed it while on the car the time before that and all the cursing and skin losing [emoji38]

Will be doing it myself.
Last time I dropped the diff at home & cut out the old ones & pressed the new ones in with a "G" clamp & socket.

Might make it easy on myself this time & visit dear old dad, he has a workshop at his house with a lathe, milling machine & a couple of hydraulic/pneumatic presses. **)

Thanks bjm
 

I have found an Australian source for replacement bush's $339.85
http://www.superpro.com.au/find/supe.../cid-999501266
https://www.sparesbox.com.au/media/c...spf4427k-1.jpghttps://www.sparesbox.com.au/media/c...spf4017k-1.jpg
https://www.sparesbox.com.au/bushing...ign=Spares+Box
https://www.sparesbox.com.au/bushing...4017k-superpro

WARNING! Beam Axle SPF4017K may not fit! Recommend that you do your own research on all information posted as I may have been a little inebriated when I posted this :)-(:

Make sure you take a few photos and do a write-up on the process. I'd be interested to see it so I can decide I could do mine or not.

HB

Hey Clarky, I went onto the link you posted, it's sold. Is there any other way to order these? How did you get them for $360 when they're $299 USD?

If there aren't any, are the Aussie one's as good?

I purchased direct from Jeeperf for $249 USD & free postage, they only accept PayPal thou.
Standard set $249usd http://www.jeeperf.com/#!product-pag...9-8ff24434adf2
Heavy Duty $299usd http://www.jeeperf.com/#!product-pag...f-2a85b377b2d4

from PayPal receipt
Item Number JWKFDBFULLSET $249.00 USD
Subtotal $249.00 USD
Total $249.00 USD
Payment $249.00 USD
From amount $351.72 AUD
To amount $249.00 USD
Exchange rate: 1 Australian Dollar = 0.707962 US Dollars

No idea about the Aussie ones, are you going to be our guinea pig :D

Rubber vs Polyurathane mounts.
 

Has the USA ones got case history greater than 100,000klm yet?
Cant help thinking the rubber mounts for the front sway bars out perform the polyurethane bushes.

Just replaced mine with rubber so will look up this thread in another 100,000 if I still have the jeep at 300,000 klm.