AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (https://www.ausjeepoffroad.com/forum/index.php)
-   XJ / MJ Cherokee (https://www.ausjeepoffroad.com/forum/forumdisplay.php?f=123)
-   -   Steering Box Bolts Sheared Off!!! (https://www.ausjeepoffroad.com/forum/showthread.php?t=107124)

junglejuice 21-07-2014 08:05 PM

I made plates for the inside and outside with through chassis sleeves for both sides...

http://i1182.photobucket.com/albums/...181_resize.jpg

http://i1182.photobucket.com/albums/...103_resize.jpg

http://i1182.photobucket.com/albums/...112_resize.jpg

bruggz351 22-07-2014 10:25 AM

Quote:

Originally Posted by junglejuice (Post 1481590)
I made plates for the inside and outside with through chassis sleeves for both sides...


They're spot on Jj. Have you installed those yet? Are they welded at all or just bolted?

I like the look of your steering brace. Does it foul on the engine? I have a front cross member off a TJ here, I was trying to mod it someway for a brace. I don't know how that is going to workout....

cheers

tanshi 22-07-2014 10:42 AM

we lost our bolts while racing offroad, ours went one by one over the period of 2 hours.

by the end we had 1.5 turns of slack before anything happened on the steering.

we were still running fast laps and 120kmh down the striaghts :)

bruggz351 22-07-2014 06:10 PM

Quote:

Originally Posted by tanshi (Post 1481731)
we lost our bolts while racing offroad, ours went one by one over the period of 2 hours.

by the end we had 1.5 turns of slack before anything happened on the steering.

we were still running fast laps and 120kmh down the striaghts :)

:shock:

.............

junglejuice 22-07-2014 08:07 PM

Quote:

Originally Posted by bruggz351 (Post 1481727)
They're spot on Jj. Have you installed those yet? Are they welded at all or just bolted?

I like the look of your steering brace. Does it foul on the engine? I have a front cross member off a TJ here, I was trying to mod it someway for a brace. I don't know how that is going to workout....

cheers

I fitted my plates some time ago, they're complete bolt-on, unfotunately the steering box brace hit the engine so it was cut off to leave just the drivers side, until I can redo it that is....

bruggz351 22-07-2014 09:00 PM

Quote:

Originally Posted by junglejuice (Post 1481845)
I fitted my plates some time ago, they're complete bolt-on, unfotunately the steering box brace hit the engine so it was cut off to leave just the drivers side, until I can redo it that is....

That's right, I think I remember now, in regards to the steering brace.

But those strengthening plates are the shot I think. I'd like to replicate those. Do you remember how much they cost, approx. to make? I realise it was a while ago now and prices have changed, but it may give me a ball park.

cheers

swoody 23-07-2014 08:00 AM

Quote:

Originally Posted by Big Dave (Post 1480700)
That's a load of BS, just too lazy to look for them. Here is the first aftermarket one that popped up in the US with a google search, and it's for right hand drive!
Pretty much like the factory kit that was fitted to mine about 6 years ago.

http://www.c-rok4x4.com/#!product/zo...ame-repair-kit

Thanks for that, I did mention that to them. It's been a week now and they still say they don't have answers from Jeep as to when the parts will get there (if ever). I got pissed off and rang Jeep Australia again who then rang the dealer then rang me back with the same answer. Really starting to miss my Jeep now and I don't even have an answers regarding parts, let alone a repair date.

junglejuice 23-07-2014 10:01 AM

Quote:

Originally Posted by bruggz351 (Post 1481857)
That's right, I think I remember now, in regards to the steering brace.

But those strengthening plates are the shot I think. I'd like to replicate those. Do you remember how much they cost, approx. to make? I realise it was a while ago now and prices have changed, but it may give me a ball park.

cheers

As I made them myself they cost me nothing but time and paint....

http://i1182.photobucket.com/albums/...194_resize.jpg
http://i1182.photobucket.com/albums/...190_resize.jpg
http://i1182.photobucket.com/albums/...191_resize.jpg

bruggz351 23-07-2014 02:25 PM

Quote:

Originally Posted by junglejuice (Post 1481938)
As I made them myself they cost me nothing but time and paint....

[URL=http://s1182.photobucket.com/user/junglejuice72/media/Chassis%20Brace/2012-11-20-194_resize.jpg.html]

:D
Fair enough then....
Depending on the width of them, I should be able to knock them out of a metre of flat stock. :cool:

cheers


All times are GMT +10. The time now is 09:57 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com

vB Ad Management by =RedTyger=