AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (https://www.ausjeepoffroad.com/forum/index.php)
-   XH Commander and WH Grand Cherokee (https://www.ausjeepoffroad.com/forum/forumdisplay.php?f=159)
-   -   What did you do to your WH/XH today? (https://www.ausjeepoffroad.com/forum/showthread.php?t=64461)

hemijeepy 10-05-2007 11:20 AM

I would give the OME springs a shot if I had a WH and throw in some Bilstine's that way you can get them re-valved to how firm you want them, one thing that cant be taken away from the OME springs is that I have not heard of them sagging..

I would buy the bits off ARB and find a good suspention shop that likes lifting 4x4's and get them to install it, (unless your handy with a spanner) ;)

Those Kits are awsome in the way that you put it in all the bits are there and all of a sudden your Trucks 3 foot off the deck but they are not made with High way comfort in mind. Thats just my 2 cents anyways.. :D

Finners 21-06-2007 12:20 PM

Modded? About to get into it. Have a WH CRD Ltd with only 19,000kms. Am very happy with QDII traction control - but the approach and ramp-over angles are woeful (as is the rebound damping on the OEM shocks). About to fit;
- Mopar bash plates (does anyone know of after-market engine bash plate? Seems Mopar only do t/fer case, suspension and fuel tank plates)
- Rocky-Road rock rails (bringing them back from the U.S. next month): http://www.rocky-road.com/media/WK_rockrail4.jpg
- ARB bullbar
- OME suspension (includes 50mm lift and stiffer front springs to take bullbar weight)
- Cargo barrier (Milford one-off)
- Tuningbox FI 'chip' - for 190kw & over 600nm of torque - hoo-hah!

- Finners

Jeeptheone 21-06-2007 07:55 PM

finners,

Pics mate, we want to see!

JTO

Marlin 25-06-2007 09:33 AM

G'day guys, I'm a NEW MEMBER and this is my first post! :) -Cheers, Boos, and Hisses all round ;)
I've just acquired a '06 Hemi (5.7) powered Grand, and know your guys knowledge will come handy when it comes to modifying it. Cheers, Ben

Jeeptheone 25-06-2007 07:55 PM

Marlin,

ooohhh HEMI 5.7 drooolllll!!!!!

I love my CRD but I would have been satisfied with the 5.7

Welcome abord mate and keen to see your pics.

JTO

johnv 13-04-2008 05:37 PM

Hello Guys, have just bought a Laredo CRD, about 2 weeks away.
Sorry to see my 2003 KJ go, it has been a fantastic vehicle, that has done cape york and towed my 16ft van around australia extremely well averaging 13.5L/100Km, I'm sure it's next owner will be just as pleased.
However, a bigger van is on the way & after looking at Toyotas the 3.5T towing capacity & torque swung me for the price. So now we start all over again, thanks for all the tips in the posts they helped greatly in the decision making.
Only one question the cargo barrier issue, where am I going to get one in Victoria and what are the implications for the curtain air bags???
Johnv - Ballarat Vic.

Meatball 14-04-2008 01:27 AM

i have a 2005 WH CRD came with navus gps , jeep nudge bar and side steps. Six months later ARB Bull Bar was fitted with 2 x IPF HID 900xs Lights
To Be Fitted
Superlift 4inch suspension + SSR Shocks (Bilsteins)
M/T Classic Lock Wheels
285/70R17 STT Cooper Tyres
Snorkel Custom Made
Diesel Chip Not know which one to go.
DP 182Kw 557Nm
Startech 183Kw 580Nm
Turningbox 202Kw 592Nw from Hiflo injection
Rear Bumper/Carrier like the one from Nomad4x4
Draw System were i can hide a battery.


All times are GMT +10. The time now is 06:15 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com

vB Ad Management by =RedTyger=