swap running gear from xj 96 into xj 99 I currently have a 96 XJ that has done a lot of serious offroad driving, and is in need of a better body. The question is ,can I change out diffs, transfer, auto, and motor into a 99 XJ without major problems, so I can keep my lockers, gearing, Front and rear bars,rock sliders and 4.5 lift. Any help appreciated.
|
Quote:
Regards A |
Your 99 car needs to comply with 99 ADR's and emissions so the engine may not be possible.
|
swap running gear from xj 96 into xj 99 Quote:
Welcome nifty and happy new year :-) ADRs aside, the biggest pain would be wiring looms and ecu etc. While the number of sensors are likely the same, all the plugs will be different. Dash is different too as well as interior switches. I would simply swap your diffs if need be, front bar and sliders (and any other engine bolt ons). Your rear bar may fit but would likely need some modification. What's the condition of the 99? Km? |
Re: swap running gear from xj 96 into xj 99 Quote:
Tcase - easy but you might need to modify the tailshaft length. Auto - No it would be a pain to swap due to the wiring. Engine - easy to swap the long block but leave the accessories of the 99 in the 99. ADRs would not be a prob with that swap. Sent from my GT-N7105T using Tapatalk |
All times are GMT +10. The time now is 09:29 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com