AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (https://www.ausjeepoffroad.com/forum/index.php)
-   WK WK2 Grand Cherokee (https://www.ausjeepoffroad.com/forum/forumdisplay.php?f=284)
-   -   Roof mounted lightbar (https://www.ausjeepoffroad.com/forum/showthread.php?t=158919)

timsarg 02-02-2021 04:25 PM

Roof mounted lightbar
 

Heya peeps , so i've already done an extensive search through the forums and haven't really seen anyone do it . My htx230's are just too big and heavy for the chief nudge bar and vibrate harder than a teenage boy in the shower so it's time to ditch the nudge bar and lights and mount a lightbar up top .

Who has done it and where did you run the cables in. I have a TH so powered tailgate. I was thinking of punching a hole in the rubber grommet but i can't see any other option to get cables up to the roof.

Thoughts

hendomatt 02-02-2021 04:48 PM

Hi

The link below is basically everything you need to know.

https://www.2180miles.com/vehicle-bu...r-installation


good luck.

Sent from my SM-G973F using Tapatalk

timsarg 03-02-2021 10:49 AM

Quote:

Originally Posted by hendomatt (Post 1669595)
Hi

The link below is basically everything you need to know.

https://www.2180miles.com/vehicle-bu...r-installation


good luck.

Sent from my SM-G973F using Tapatalk



legend thanks mate :)

Markus 05-02-2021 09:44 AM

3 Attachment(s)
Hi Tim, done a similar install on my Frontrunner rack and found it fairly easy ro run the cable to the lightbar up along the windscreen with some 3M double sided tape (hasn't moved in 4 years). Added some pictures hopefully show this and where it comes up to the Rack (not too obvious).
Also added some small LED lights to the Rack on the other side running the cables for them in the same manner as shown in the previous reply, works well, bit more fiddly running the wires through the side of the car though.
Good luck

timsarg 05-02-2021 09:52 AM

Quote:

Originally Posted by Markus (Post 1669688)
Hi Tim, done a similar install on my Frontrunner rack and found it fairly easy ro run the cable to the lightbar up along the windscreen with some 3M double sided tape (hasn't moved in 4 years). Added some pictures hopefully show this and where it comes up to the Rack (not too obvious).
Also added some small LED lights to the Rack on the other side running the cables for them in the same manner as shown in the previous reply, works well, bit more fiddly running the wires through the side of the car though.
Good luck

Thanks markus , i did toy with running it down the window and after seeing your pics i might just do that. I need to get my windscreen replaced first due to tonnes of stone chips . I also want to move my uhf and phone booster antenna up on the rack as well so might run the lightbar down the windscreen and uhf/cel-fi through the boot

Markus 05-02-2021 09:58 AM

No problems, so not going for a Bullbar this time then?

timsarg 05-02-2021 10:10 AM

Quote:

Originally Posted by Markus (Post 1669690)
No problems, so not going for a Bullbar this time then?

nope. kinda enjoying not having 100kg on the nose and once i can get a lightbar up top and move my antenna's i can sell the chief nudge bar and go back to a totally clean front end . I don't do enough night time driving anymore to warrant a bullbar up front


All times are GMT +10. The time now is 01:45 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com

vB Ad Management by =RedTyger=