AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (
-   XJ / MJ Cherokee (
-   -   Diesel XJ **Parts & Info** (

oestreich 04-07-2013 12:11 AM

Bought and fitted the 230R2 Diesel filter from PARKER/RACOR last week. 99.00US$ in EBAY as mentioned before in the forum. Be aware that it doesn't come with heater/sensor! It's so much the same as the original that I could reuse the bottom glas with the heater and water sensor straight away.

Same EBAY provider sells replacement filter-elements for 20US$

layback40 23-09-2013 06:28 PM

Rear pinion seal

Just replaced the real pinion seal.
National (Federal Mogul) 47033N
Under $20 from bearing supply place.

mud_slut 25-09-2013 01:10 PM

also the pinion nut, if needs replacing is the same for a gq patrol

mud_slut 25-09-2013 02:44 PM

egr blanking plate- compliments from MM for putting me onto this one.

this sits between the intake manifold and the EGR rather than the EGR and exhaust.

Jumunji-XJTD 10-10-2013 11:50 PM


Originally Posted by mud_slut (Post 1415980)
egr blanking plate- compliments from MM for putting me onto this one.

this sits between the intake manifold and the EGR rather than the EGR and exhaust.

awesome got mine on it's way!

oestreich 21-10-2013 08:09 AM

Had to replace rear wheel bearing (and axle) on my 1999 2.5TD. Here's some part numbers:

Roller bearing: KOYO DB67309 ... or ... Crown J8134036

Seal: Precision D228K ... or ... FM 8660S ... or ... SKF 13992

Hope that helps

Mudmonster 30-10-2013 07:27 PM

Not sure if this is in here or not but, below is the fan and part number that are interchangeable

US MOTOR: 22159
AIRTEX:2775TA 2791TA
CARQUEST:77271 77293 EVERCO:A5545
HAYDEN: 2791
MURRAY: 272306
IMPERIAL: 215160

I am running the HAYDEN: 2791 on mine

after trying to get my jeep to run cooler in the summer heat I decided to buy a new fan clutch a SEVERE DUTY one.
think it has sorted my problems.

normally on a 30c day at 100-110k the temp gauge would sit on 100-105c AC off and 105-110+ with the AC on.
but today it was 30c out side, traveling down the highway at 110k with the AC on it only reached 95c around town it now doesn't go over 80c

this is the clutch I brought

they are more difficult to fit in past the shroud as they are about 4 times thicker than the standard one.
it doesn't move the actual location of the fan

I can actually feel the air being pulled through the front grille now and feel the hot air being blown out the bonnet scopes, I could feel it before but it now has a lot more force.

Mudmonster 24-11-2013 03:05 PM


Originally Posted by Beefcake (Post 1430378)
What size socket fits the injectors? I have a heap of random deep sockets at work and will modify one to suit #1 injector with the harness. Also rough size of the plug would be great so I know what size the cutout needs to be. Thanks!

Injector is a 27mm

Mudmonster 12-01-2014 07:35 PM

just found this belt tensioner, genuine part numbers are:
04897159AB ; 04897159AA

I think someone was asking about one a while back?

All times are GMT +10. The time now is 04:22 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

AJOR 2002 - 2019 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep. Jeep Wrangler JL Australia release

vB Ad Management by =RedTyger=