Aw4 valve body upgrade Heya guys.
Bit of a drama. Spent the last few days swapping out my transmission for a lower ks one. Figured while I was at it I’d throw in a transgo shift kit at the same time. (Dumb I know) After getting all back together I went to test. Reverse is all good locks. But no forward gears at all. Revs pick up a little bit so I know the nss is working correctly. Any ideas? I have the spare valve body and all the old springs from the mod kit. I’m going to start with checking the solenoids. Cheers K Sent from my iPhone using Tapatalk |
mate its been my experience that the depth of knowledge on tranys on the ausi forums/ fb is pretty shallow.
suggest you try asking on NAXJA much greater depth of knowledge there. Good luck with it. |
Thanks mate [emoji1303]
Sent from my iPhone using Tapatalk |
All times are GMT +10. The time now is 03:50 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com