Low throttle pedal JK Diesel
 

Sick and tired of having uneven throttle pedal to brake pedal on your JK diesel?
See the pic and instructions below and have the added advantage of better throttle response and a more comfortable driving position:0=

30 minute Throttle Fix
 

Nooooo that is so redneck...or should I say redwood, or maybe hardwood??

Get a plastic doorstop/cabinet making wedge and two m6 bolts, one 30mm one 40mm and 30 minutes and you have a permanent solution that gives the right height and the right angle.

Quick steps, remove TPS and then remove the two studs using a 1/4" socket set..4mm I think?
Lay wedge on the TPS base, trace and cut off excess with bench grinder etc
Drill two holes in wedge.
Lay wedge on wall and use two bolts to secure the TPS....Done!

Enjoy and you will wonder why you didnt do it sooner and forget how wierd it felt before!
Matt.

Don't you have to have rubber on the pedal face? Ie maccas solution.

Pedal face on the JK is plastic anyways

The second solution does not differ at all from what was stock (the pedal face) it changes the mounting of the pedal box to lift it. The second solution is much cleaner than the first.

The first looks like something Jethro from the beverly hill billies would make :mrgreen:

My right leg is 1" longer than the left so I'm OK. :D:D:D

You can hear the Banjo's playing down my way !!!!!
I do like the 2nd option and will probably make the mod more permanant.