Tick and tock....... Here is one for the experts. My 08 JKU makes a new sound. One "clonk" when the accelerator pedal gets push down and one "clonk" when taking off the pressure from the pedal. Assume it's in the driveline could be from transmission to the differential. 4.88 regeared with rear locker lifted about 4" with stock drive shaft.....ticktock what's that sound and where could it come from?
Sent from my SM-G930F using Tapatalk |
Have you tried checking the engine and tranny mounts?
|
Quote:
Rod. |
While under your JK checking engine mounts etc, also check the CV joints in the driveshaft/s for any movement. If they are of the way out they could be tick-tocking as power comes on and off.
|
I had a similar sound and it must have been the front universal joints. Got it fixed under warranty and it came back with shiny new axles/unis.
|
My front axles are RCV's but I am suspecting it could be the rear drive shaft RZeppa CV joint. Common issue with lifted Jeeps.
However will check engine and tranny mounts as well. Sent from my SM-G930F using Tapatalk |
All times are GMT +10. The time now is 04:57 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com