Diesel Filter HI Guys
has anyone fitted a Diesel filter before the factory filter? im looking at getting one and just wanted to see how any of you guys installed it , theres not really any flat area under the bonnet around the abs module to install it. cheers |
This one's on my to do list as well 8-)
|
I installed a Racor filter, with water alarm, on the Commander.
I mounted it to the strut cross brace, it has been on there for about 7 years, so no problems. It was similar model to this: https://www.ebay.com.au/itm/Racor-Di...kAAOSwJ4hY9-Qf I installed a 30micron spin on and carried a 2micron spare, figured if the alarm went off, spin on the 2micron and drain more often on the way home. lol Ah, just remembered how I did it. I used a piece of half round that fit snug over the cross brace. I then fabricated a bracket from angle, to fit the half round and drilled it to fit the filter mounting holes, so the filter could be removed from the bracket if required. Then I welded the angle to the half round, so that the filter sat in the right place. When I then attached the bracket to the cross brace, I used the existing threaded hole, but instead of drilling another hole, I decided to use a hose clamp at the top. Then if I wanted to take it off and put it back to standard, it was as built, no extra holes. Sounds a bit convoluted, but pretty easy job, I can get some pics if anyone is interested. |
Quote:
|
I'm off up bush tomorrow, to see the the grandkids, so I'll take some pics.
The Son has the Commander, so it will give me an excuse to disappear, when I need a break.:roll: |
Quote:
|
Just arrived home, here's some pics, hope they help.
http://www.ausjeepoffroad.com/forum/...d3b03df33c.jpg http://www.ausjeepoffroad.com/forum/...d3b1f4da53.jpg http://www.ausjeepoffroad.com/forum/...d3b3dbc6de.jpg http://www.ausjeepoffroad.com/forum/...d3b5b36a74.jpg The bottom picture is the audible beeper and light in the console. I put a heat sheild of woven fiberglass behind the filter to block any direct heat for engine/turbo. But like I said, it has been on for about six years, without any issues. By the way, as the pics show, I didn't use angle to mount the filter I used flat bar, my apologies it is an age related memory issue.lol |
All times are GMT +10. The time now is 09:01 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com