Auto Elec - need a good one Hey, am in need of an auto electrician in or around Ingleburn/Campbelltown.
Long story short..Jeep wont start, cranks and cranks. Have put it down to an electrical/wiring issue. Have replaced the cps, checked fuel all good. Now thinking its the 5 volt circuit that runs the tps, cps etc. Only problem is i live northern nsw and jeep is in sydney.. cheers. |
for anyone that cares... found the problem - cracked throttle position sensor causing starting issues - replaced and all good.
|
Quote:
You have provided an extra thing to check! |
As a matter of interest did you check codes? only reason i ask is my jeep hasnt started up in a while and i (hopefully) traced it back to a faulty fuel pump
|
Quote:
|
alot of googling and unplugging each sensor on the 5v circuit. Also found that it had a crack in it once we removed the tps sensor.
No codes etc as that is part o the fault - cant even read the ecu with a scantool |
All times are GMT +10. The time now is 12:12 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com