The 2 surfaces are mated. One can mate the surfaces with diamond paste if you know what you are doing. Have a close look at the surfaces to make sure there is no damage. If there is, good luck trying to find an injector specialist that knows how to do a rebuild.

i just used a wire brush. seems ok so far

Does anyone have a spare or stuffed #1 injector?

mine reader 112 Ohms so I don't really want to experiment on it.
I'm trying to fix the usual symptoms, considerable power drop after 2000RPM.
Also, have injector pump leaks so waiting on a seal kit from Europe to see if that affects power after 2k rpm.
and now have a boat diesel primer as the factory lift pump is unserviceable.
just the usual fun.:)

Anyone know where to buy these injectors? Or where to get copper wire that thin?
Cheers


Sent from my SM-G892U using Tapatalk

You could try a search for enamelled copper wire on ebay. You're sure to find the wire in range of size including the diameter used in the injector.

Maybe if you had in your info where you are located people may be more likely to respond.
I could suggest some places in Victoria Australia but that maybe a waste of time.

Im from NZ. But can usually buy things from anywhere if you had a link to a size that is small as .08 that would be appreciated.

Cheers
Tom

Sent from my SM-G892U using Tapatalk