diesel leek from top of fuel filter hi guys I have a 2007 CRD that has started leeking from the top of the fuel filter coming out of what looks like a sensor with wires that go into the housing, I believe that the sensor on the bottom is the water sensor & the one on the top is the heater sensor.
## has anyone had this issue ?. ## is there a quick cheap fix as we dont need the heater here in QLD ?. ## or is it a typical:- Just Empty Every Pocket scenario. cheers piggy. |
problem found.
the heater sensor had malfunctioned (apparently happens a bit in warmer climates) it heated up that much melting wires & damaging the housing causing fuel leak. replaced housing $300 & have now disconnected the heater sensor on the fuel filter (just unplugged it) no warning signs or codes have appeared. if you have a CRD you may consider unplugging this sensor. |
Where did you source a new filter housing from?
That seems way cheap |
All times are GMT +10. The time now is 03:39 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com