Hello future Diesel Jeepers!
The nominal dimensions for the rear main seal on the 2.5TD are around the forum somewhere (I found them and ordered one). For those looking for a quick and easy part # it is as follows: RSM11013012LVC Current price on the Gold Coast $77.44 I will post the part #'s for the rear bearing housing seal, camshaft seal & flywheel o'ring after I get them in and confirm they're the go. |
Complete rear seal part number list Okay so my gearbox is back in and everything is dry and sweet after a few days of use.
Here are the part numbers for common SAE O-rings that can be had at industrial supply shops: Camshaft Oring - BS145V (SAE 145 Viton) $7.75/EA Bearing housing Oring - BS164N70 (SAE 164 Nitrile 70) $4.50/EA Flywheel Oring - BS037N70 (SAE 037 Nitrile 70) $1.09/EA Hope this saves at least one of you the hours and hours it took me to avoid shilling out for a seal kit. These are readily available which = less down time. We're supposed to burn the oil, not leak it! :hammer: |
A good option for fuel filter if your OEM one fails or needs replacement.
Donaldson offer a much cheaper alternative parts list below for conversion Fuel filter spin on P581682 x1 -10 micron P576614 head P569758 bowl P570619 drain sensor got the lot for under $200 ex Donaldson Aus |
All times are GMT +10. The time now is 02:50 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com