AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (https://www.ausjeepoffroad.com/forum/index.php)
-   REVIEWS & NEW PRODUCTS (https://www.ausjeepoffroad.com/forum/forumdisplay.php?f=137)
-   -   XJ Steering Brace - FROM M.O.R.E (https://www.ausjeepoffroad.com/forum/showthread.php?t=50200)

Jimmyb 31-07-2004 04:41 PM

XJ Steering Brace - FROM M.O.R.E
 

Whats it do?

If your running tyres that are larger than standard, there is always extra strain on your vehicle. One place that will always suffer most is the steering box. MORE in the USA have designed a bolt on steering brace that not only heavy duty but fits up in minutes. It is a very cheap piece of insurance to prevent the steering box from being torn off the frame.

http://ausjeepoffroad.com/features/feature48/image1.jpg http://ausjeepoffroad.com/features/feature48/image2.jpg

Presented
The brace is painted with a tough "Hammerite" silver-gray paint and the clamp is zinc plated gold. All mounting hardware included, simple bolt-on design. No drilling or mods required (for right hand drive air-con pipe needs moving).

Time to make it work
Where do I start? Fitting this product up is very simple. The instructions supplied are designed for a left hand drive vehicle but can easily be understood for a right hand drive. The two halfs of the coupling fit perfectly around the flange of the steering box, with them in place you then proceed to fit the actual arm.

You will find that the air conditioner pipes will be in the way. If you remove the bracket holding them in place you will be able to move them about 10mm out of the way and attach the face plate for the arm onto the chassis rail.


http://ausjeepoffroad.com/features/feature48/image3.jpg http://ausjeepoffroad.com/features/feature48/image4.jpg

All in all its a simple install, easy to understand and will give you the extra confidence that the steering will remain in place when you are wheeling.

http://ausjeepoffroad.com/features/feature48/image5.jpg

From M.O.R.E
We specialize in providing quality products for Jeep® vehicles. We have been in the 4-wheel drive parts & accessory industry since 1978, and use our own Jeep® vehicles for daily driving, exploring, rock-crawling, camping, fishing/hunting, gettin' stuck, and racing around with our buddies!

We have two main goals: To make every product that we manufacture the best that it can be, and to treat you, our customer, with respect. M.O.R.E. is still a small company and we try to give personalized service to all of our customers.

www.mountainoffroad.com

cherokee94nz 31-07-2004 05:31 PM

I made one from the instructions from Go Jeeps site, i was a little late in fitting it, and had to plate the chassis at the same time. Penguin

Jimmyb 13-08-2004 10:26 AM

Well this is a out of the box product.

Richo 02-12-2004 11:57 AM

$$$ How mucho???

Jimmyb 02-12-2004 05:23 PM

comes in around the $120 mark landed in Australia.

Agent Orange 15-01-2005 10:46 PM

have you seen these ones... ?
(i know they are lefties)
http://www.c-rok.com/sb.html

what do you think ? :0=

scuba_steve 02-12-2006 09:21 AM

hey wasnt the chassis cracking a recall for these back when they were new? My mum bought an XJ brand spankers in 96 and im sure that went in for a plate to be welded in or something under recall


All times are GMT +10. The time now is 03:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com

vB Ad Management by =RedTyger=