|
Thermostat A few options
This is an after market one. the list gives genuine part numbers from other applications that are the same. Brand: Firstline Part: Thermostat Brand Part Number: FTS19979 Technical Specification - Temperature Range [°C]: 80 This product fits with the following models OEN Part Numbers AUDI 022 121 113 AUDI 035 121 113 BMW 11 53 1 264 668 BMW 11 53 1 318 274 BMW 11 53 1 713 040 MERCEDES-BENZ 002 203 75 75 MERCEDES-BENZ 002 203 80 75 MERCEDES-BENZ 615 200 13 15 MERCEDES-BENZ 617 200 18 15 VAG 035 121 113 VW 022 121 113 VW 035 121 113 More 04778975 OEM Models 04778975 4778975 98424854 98433497 7072643 V94DD8575AA RTC6673 51064020061 1338466 91153670 GTS287 PEL10009EVA 75109 5963.80 04778975 Fit Vehicles VauxhallFRONTERA Mk I OpelFRONTERA A OpelFRONTERA A Sport DodgeCARAVAN II 2.5 TD ChryslerVOYAGER Mk II ChryslerVOYAGER II FordSCORPIO Mk II Estate FordSCORPIO II Break FordSCORPIO II Estate FordSCORPIO Mk II FordSCORPIO II Land RoverRANGE ROVER I JeepGRAND CHEROKEE Mk II JeepGRAND CHEROKEE II JeepGRAND CHEROKEE I JeepCherokee Manufacturer Model Motor PS KW Year KBA OPEL FRONTERA A (5_MWL4) 2.5 TDS 115 85 09/1996 bis 10/1998 2127 - 322 OPEL FRONTERA A Sport (5_SUD2) 2.5 TDS 115 85 09/1996 bis 10/1998 2127 - 323 ROVER 800 (XS) 825 D / SD (XS) 118 87 01/1990 to 02/1999 2055 - 336 ROVER 800 (XS) 825 D / SD (XS) 118 87 01/1990 to 02/1999 2055 - 424 ROVER 800 Coupe 825 SD 118 87 09/1993 to 02/1999 2055 - 378 ROVER 800 Coupe 825 SD 118 87 09/1993 to 02/1999 2055 - 379 ROVER 800 Hatchback (XS) 825 D / SD (XS) 118 87 01/1992 to 02/1999 2055 - 337 Description for: QH Thermostat, Manufacturer: Ersatzteilhersteller Quinton Hazell Offer ID: 59795957 Item Number: 253965 EAN / GTIN: 5016593258402 (European Article Number / Global Trade Item Number) OE No.: Chrysler: 04778975, Ford: 7072643, Opel: 1338446, 1338466, 91153670, Rover: GTS287, PEL10009EVA, RTC6673, Vauxhall: 91,153,670 (only for comparison) QH Thermostat, coolant Manufacturer Model: QTH353 Opening temperature: 80 ° C Supplementary Article / Supplementary Info: Without gasket Diameter 1: 67 mm Height: 25.5 mm Diameter 2: 43 mm Assembly: cooling OET Cross reference: Chrysler: 04778975 Ford: 7072643 Opel: 1338446 1338466 91153670 Rover: GTS287 PEL10009EVA RTC6673 Vauxhall: 91153670 Brand: Gates Part: Thermostat Brand Part Number: TH13380G1 Technical Specification - Opening Temperature [°C]: 80 This product fits with the following models OEN Part Numbers CHRYSLER 04778975 CHRYSLER 4778975 FIAT 98424854 FIAT 98433497 FORD 7072643 FORD V94DD8575AA IVECO 98424854 IVECO 98433497 JEEP 04778975 JEEP 4778975 LAND ROVER RTC6673 MAN 51064020061 OPEL 1338466 OPEL 91153670 ROVER GTS287 ROVER PEL10009EVA STANDARD 75109 VAUXHALL 1338466 |
Rocker cover Gasket Dont know that I would bother purchasing one. A good bead of silicone would probably be as good.
Engine Code: 425CLIRX SKU: 214097_TD_OZ--3263861 Bore Ø [mm]: 92 Brand: FAI AutoParts Part: Rocker Cover Gasket Brand Part Number: RC1004S Technical Specification - Bore Ø [mm]: 92 This product fits with the following models OEN Part Numbers FORD 1690030 FORD 22032245G FORD 4863789AC FORD JE4897250AB FORD V95DD6584AA |
Coolant temp sensor Brand: Bosch
Part: Coolant Temperature Sensor Brand Part Number: 0280130055 Does not fit !! All the Bosch data says it does. This number has a coarse thread the VM has a fine taper thread. Supercrap supplied me FAE 33600 also known as CTS 036 they are the wrong sensors. FAE 33540 are the correct ones. Supercraps response after I spoke to them several times ~ "We are not able to source the FAE unit as it is not listed with any of our suppliers and do not wish to inconvenience you further with the risk of supplying another replacement which will not fit." Rod Small Digital Projects Manager /// Supercheap Auto 751 Gympie Rd| Lawnton QLD 4501 P.O. Box 344 | Strathpine QLD 4500 P: 07 3482 7459 | M: 0434 577 253 | E: rods@superretailgroup.com 1300175010 So after 2 weeks of being stuffed around they just cut you off & wipe their hands. The correct part ~ same as for a 93-98 grand cherro ZJ. Chrysler 56004815 found it on sensor SMP TX71 or TX71T Airtex 5S1035 car Quest 712559 ASIN B000C81W48 Wells SU381 FAE 33540 Omix Ada 17217.02 as a last resort you can take the end (plug) off & replace the thermistor. its a NTC 5MMDIA 4.7KR CAT.NO: RN3438 at Jacar ~ $1.75 That is what I have done. |
NOTE,
previous post with the link is no longer avalible some turbo options, complete turbo or just a core http://www.aliexpress.com/premium/VB...ewCP=y&catId=0 I have purchased the turbo from aliexpress good quality and a 100% same as the original all part No's brand etc. |
I have tracked down the correct engine and trans mount part No.s
Left Mount 52059201AC Right Mount 52059200AC Trans Mount 52058539 http://i295.photobucket.com/albums/m...Jeepmounts.jpg These guys have them but a bit $$$ http://www.jeep4x4center.com/ I get bored and just start looking for stuff. ;) |
Quote:
|
del97td
Default gasket part numbers Hi these are the part numbers for Payen gaskets available from Repco and other part stores : DK 573; VRS Gasket Set (no head gasket and no copper washers for the oil lines)but all other gaskets and valve stem seals. AY 400; Head Gasket 1.42 mm thickness. AY 410; Head Gasket 1.52 mm thickness. AY 420; Head Gasket 1.62 mm thickness. HBS 108; Head Bolt Set , contains 10 m14 bolts and 8 m12 bolts. i ordered a 1.42 +dk 573+ hbs108 from Repco in SA and received them overnight from NSW for a very good price. |
Front Drive shaft Uni Joint the k5-13XR I just bought one with the grease nipple in the end of the caps, great for the cardan joint easy to grease up, the
spicer Part No. 5-433-1x Drive Shaft CV Socket Yoke Assembly http://i295.photobucket.com/albums/m...er_Jeep/aa.jpg Neapco CV-82 or 7-0082 Spicer 211355X or D/S211355X |
EGR removal. just spent a few hrs getting rid of the EGR from the 98 diesel I got last year.
Finally found the engine problem. The EGR had internally fallen to pieces. There were 3 loose bits of metal inside it. When I pieced them together there was a small piece not there. it was the shape of the bit that was found on # 1 inlet valve face. So that mystery is solved. I cut the metal tube off about 2cm above the nut (1 1/16") on the exhaust manifold & placed a 10c piece under the pipe end in the manifold so that later an EGT probe can be put in with its fitting welded into the pipe stub. On my other jeep, I just put a piece of tin lid between the pipe flange & the EGR body & cut the pipe off at the flange. Given what I found this time I have placed a second piece of tin tho blank off between the EGR body & the inlet manifold extension. This blank needs to be sort of triangular in shape rather than oval like the other. There is a small hole into the EGR workings that needs to be blanked off as well. If any one is doing an EGR disable, best do both blankings so that there is no chance of metal fragments going into the inlet. |
| All times are GMT +10. The time now is 03:56 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com