AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (http://www.ausjeepoffroad.com/forum/index.php)
-   Fabrication and Custom (http://www.ausjeepoffroad.com/forum/forumdisplay.php?f=139)
-   -   Driving Light Mounts (http://www.ausjeepoffroad.com/forum/showthread.php?t=54229)

Fouros 21-04-2005 12:17 PM

Driving Light Mounts
 

Ok you fabbers got a question for ya

I wanna mount a set of lights to my KJ but I dont want to drill, would you forsee any problems mounting a bracket where the recovery point bolt on to the front of the Jeep tried to get photos but the bloody digital camera has died :evil:

with the factory point it looks like there is two Holes pre drilled so it shouldnt take too much to fab something up,

I throw myself on the mercy of the forum

TIGGER 21-04-2005 12:58 PM

The TJ has some factory mounts (which i have been running on my TJ for a few years) that cost $60 from the dealership.

They are just a bit of metal that just bolt in under the recovery point and allow you to mount the spotties - not sure if something similar would work on a KJ.

http://www.aussiejeepimages.com/gall...serialNumber=2


All times are GMT +10. The time now is 06:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

AJOR 2002 - 2018 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.midlifemate.com wayalife.com jkwrangler.com ausjeepforum.com jk-forum.com canadianjeepoffroad.com cryptoprofitcalculator.net

vB Ad Management by =RedTyger=