AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (https://www.ausjeepoffroad.com/forum/index.php)
-   Wanted (https://www.ausjeepoffroad.com/forum/forumdisplay.php?f=157)
-   -   Wanted 16 X 8 8 stud wheels (https://www.ausjeepoffroad.com/forum/showthread.php?t=140451)

yetiboy01 05-08-2015 10:05 AM
Wanted 16 X 8 8 stud wheels
 
To Suit: Chev or ford 8 on 6.5 PCD
Location: Brisbane

I'm after 16 X 8, 8 stud wheels with 8 on 6.5 PCD
Steel or beadlocks

OKA4wd 05-08-2015 11:00 AM
Wheels
 

G'day I am near sure from memory these were used on OKA's ( 8 x 165 x 6.5 backspace ).? If this is right you can check the OKA website forum as they have often had them available:-(OKA4WD.com). Very heavy rims though as the GVM is 5.5 tons, lots of owners changed to alloys because of the weight savings

yetiboy01 05-08-2015 06:34 PM
Quote:
Originally Posted by OKA4wd (Post 1543424)
G'day I am near sure from memory these were used on OKA's ( 8 x 165 x 6.5 backspace ).? If this is right you can check the OKA website forum as they have often had them available:-(OKA4WD.com). Very heavy rims though as the GVM is 5.5 tons, lots of owners changed to alloys because of the weight savings
Thanks I should of put up I need 4" or less back space
, its a pity as the Ocka wheels would make great beadlock wheels

OKA4wd 06-08-2015 09:47 AM
sorry, they are 4.5 inch backspace


All times are GMT +10. The time now is 01:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com

vB Ad Management by =RedTyger=