-   ZJ WJ WG Grand Cherokee (
-   -   Unknown grey-ended connector near EGR valve (

gibrate1 09-02-2018 09:51 PM

Unknown grey-ended connector near EGR valve

I purchased a WG CRD as my first car last year. I have discovered that the previous owner performed an EGR delete on my Jeep and incorrectly wired the Red and Green wires directly to the MAF sensor. (the previous owner also removed MIL light). An unknown grey connector is also attached to the lower end of the green and red wire.

JeanLuke 09-02-2018 09:58 PM

That looks like the plug off the EGR vacuum solenoid. Is it still there? It's identical to the solenoid on the turbo vane control and mounts under the throttle bell crank on the firewall.

gibrate1 10-02-2018 09:05 AM

Location of connector?

Can you reply back to me with pics of where the connector plugs into? I'm having a hard time finding where the throttle bell crank is located.

JeanLuke 10-02-2018 09:58 AM

Left side, above the intake manifold

gibrate1 13-02-2018 06:40 PM

Thanks for the reply back to me with pics :)

All times are GMT +10. The time now is 06:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

AJOR 2002 - 2018 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.

vB Ad Management by =RedTyger=