AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (
-   XJ / MJ Cherokee (
-   -   Pre update fuel tank into 01 update (

Monstermk2 10-02-2018 07:48 AM

Pre update fuel tank into 01 update

Almost finished doing my change over from the pre update we had to the 01 update , and now for the fuel tank , itís a 160ltr custom duel sided long range , was made for my old 97 pre update ,

Before I start trial and error testing , pump wise , the 01 has an intank filter instead of a inline filter , so in theory I should be able to just fit up a inline filter and hook in the old pump , Ďplugs are the sameí as they are both obd2

Now my question, can i throw a Walbro pump in , or is there something specific that a xj pump needs to be able to do that would throw out the way it runs , my impression is that so long as they can deliver enough fuel and hold the 49psi to the rail it should be fine ,

Hopefully someone here might of done something similar

deebo 28-04-2018 01:35 PM

Any updates with this?

darksidecustoms 11-09-2018 07:20 AM

Following, I have a stock pre-update OBD2 tank I plan on swapping into my 98 for 2 reasons:
1) user replaceable fuel filter
2) Go Jeep vent mod for a budget long range tank (~90L total)

The main difference Iíve seen so far is that aside from the pumps mounting differently (top vs front) the sender resistance is opposite in range for full-empty, so Iíll need to work around this either with a gadget or an alternate sender with the right ohm range.

Sent from my iPhone using Tapatalk

All times are GMT +10. The time now is 02:26 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

AJOR © 2002 - 2018 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.

vB Ad Management by =RedTyger=