AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand (https://www.ausjeepoffroad.com/forum/index.php)
-   Early Model Jeep (https://www.ausjeepoffroad.com/forum/forumdisplay.php?f=129)
-   -   Time to move my YJ (https://www.ausjeepoffroad.com/forum/showthread.php?t=155710)

Gildo 27-05-2019 07:48 PM

Time to move my YJ
 

Folks I’m at a point in time and space (and cash) where im tossing up what jeeps and projects to keep and continue with and what deserves to be moved on to new homes for a better life.
My YJ isn’t getting the love it deserves and has very little use.
Its been on the road twice in about 6 years. It was converted from LHD to RHD by the original owner and importer but has never been signed off so is not registered.
It was running ok last time I took it out but due to sitting for long periods it doesn’t start first go. It has been used on our bush block on occasionally

Good bits
It’s a 1989 YJ wrangler Islander, I’m only aware of one other in this trim in the Australia.
Stock 258 with a Weber carburettor.
5 Speed AX-15 manual, NP231 transfer.
31s on black steel rims, extended shackles to clear and bushwacker flares.

I’m not looking to make a fortune, what’s it worth to a Jeep guy?

I’ll add some pics when I work it out again,
PM me if you’re keen.

Jimmyb 28-05-2019 12:13 AM

Under message, "quick upload"

Gildo 28-05-2019 09:27 PM

http://www.ausjeepoffroad.com/forum/...d1b013a427.jpg

Gildo 28-05-2019 09:31 PM

http://www.ausjeepoffroad.com/forum/...d1ba0bb9cd.jpg

http://www.ausjeepoffroad.com/forum/...d1bd7a3e33.jpg

http://www.ausjeepoffroad.com/forum/...d1c1e5654d.jpg

CJ6np435 01-06-2019 05:20 PM

looks in nice condition, any rust?, is the front diff high pinion?

10a Rubicon 02-06-2019 08:54 PM

Sent you a pm

Gildo 02-06-2019 09:02 PM

Quote:

Originally Posted by CJ6np435 (Post 1649920)
looks in nice condition, any rust?, is the front diff high pinion?

No rust anywhere, clean and straight.
It’s the stock front D30 YJ diff, low pinion with the vacuum disconnect.


All times are GMT +10. The time now is 10:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com

vB Ad Management by =RedTyger=