Advice needed on lift kit
 

Hi all , not long ago i purchased a 2005 petrol cherokee with about 90,000ks on the clock . I live up here in Darwin so i decided to do 3 days prospecting out on the old Margeret river gold diggings .The entrance to the fields is def 4 xd territory the jeep handled it no probs except for the rear suspension kept gettn those horrible sounds from the rear of the suspension bottoming out . I have just ordered a kit 50 mm lift kit with springs and shocks , i am not to bad machanicly so i might install it myself . I think after installation the front and rear camber needs to be reset ???? Also is there anything else i need to look at ??? I was very surprised with the jeep on the open highway i have to say its a pleasure to drive on the open highway and it seems to have power to spare. I believe my jeep has never been put into 4x4 , i can get it into 2 wheel drive and part time 4x4 and full 4x4 but it refuses to click into low low , i have blown the plastic bush were the cable attaches to the transmission but ive ordered another made from different material when i install the new bush i will retry to get it into low low . I would be grateful for any advice ...