4” superlift Calling anyone in Australia who currently have this lift installed.
Would like to know shocks and springs you are running in front. Looking at changing the the oem, since the superlift utilises the factory struts I can change them now. Sent from my iPhone using Tapatalk |
Finally received the superlift kit
https://uploads.tapatalk-cdn.com/202...ad2deb2bd1.jpghttps://uploads.tapatalk-cdn.com/202...52aca4c77d.jpghttps://uploads.tapatalk-cdn.com/202...a350d85405.jpg Sent from my iPhone using Tapatalk |
Wow didn't realise there were so many components in the kit!
What's your time frame for installation? Keep us updated on progress |
So jealous!!!
|
About 4weeks
Plasma cut and weld front cross member Disassemble front and rear diff Replace diff bushes Install 4.11 gear ratios Start installing the lift kit minus rear shocks Install JBA upper arms Install rear Bilstein 5165 shocks Paint rims before mounting 34” tyres Lots to do. Sent from my iPhone using Tapatalk |
Quote:
What are the part numbers of your rear shocks? |
I’ll look them up later and post it up, but here are the specs:
The 5165 series are 17.91" collapsed and 31" extended. You get more travel from the 5165 series because the dividing piston is moved to the shock's external reservoir. Sent from my iPhone using Tapatalk |
All times are GMT +10. The time now is 07:52 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com