2008 WH 3.0 CRD no start Hi all,
i have this 2008 WH 3.0 CRD that does not start with P0616 one of the causes could be the starter relay, in Power Distribution Center i can't find the starter relay, can someone help me ? thank you Giacomohttps://www.ausjeepoffroad.com/forum...a051434d59.jpg |
https://fuse-box.info/jeep/jeep-gran...ses-and-relays
R11, which is on bottom row in your pic. Of The 4 smaller relays that are grouped together, it’s the furthered one on the right. Cheers, |
Quote:
when I replace it I will let you know the outcome .... do you know if there is a pump in the diesel tank ? Giacomo |
Yes,
And if you have a problem, it can be a simple fuse. Read the thread on this post... https://www.jeepforum.com/threads/je...tions.4312063/ In your pic on the top row around the middle are the blade fuses. Yellow 20A in the 21 position is your fuel pump. What exact problems are you having? |
Quote:
relay replaced but the engine does not start now I double check all the fuses but I'm afraid not to solve ..... the specific problem is the following: after replacing the oil cooler the jeep started regularly and I drove a few kilometers in the evening off and the next morning the engine did not start anymore ..... do you know which of the two pipes brings the diesel to the filter ? thank you Giacomo https://www.ausjeepoffroad.com/forum...b4e294fbc0.jpg |
|
|
All times are GMT +10. The time now is 04:20 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com