AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Worn front control arm bushes
View Single Post
  #1  
Old 23-08-2009
Blue C  Blue C is offline
Newbie
 
Join Date: Mar 2007
Location: Adelaide
Age: 61
Posts: 47
Likes: 0
Liked 0 Times in 0 Posts
Default Worn front control arm bushes

I have had annoying front end squeak (driver's side mainly) for over a year (now 49,000km). Stumped my usual 4x4. Local mechanic found cause recently- my front lower control arm bushes are cracked & worn (eccentric centre bolt hole through bushes now). The local Jeep dealer advised not warranty as 2 inch lifted suspension.
The OEM rubber bushes aren't replaceable as separate items as they are bonded to the control arms during manufacturing. Jeep dealer quoted replacement control arms at $1440 each!

A local engineering firm in SA is making up Nolathane bushes for original control arms (upper + lower). Fixing the new bushes to the steel sleeves in control arms has been a challenge but they seem to think they have it sorted out. Will know later this week if they have been successful. Hopefully will solve the problem.
__________________
XH Ltd CRD, 2" lift, Bilsteins, Cooper STT's, LR tank, Bullbar, Rock sliders, Wheel carrier

Last edited by Blue C; 24-08-2009 at 08:10 AM.