Ok as I mentioned I got the rack from rossj and he had some photos up before
http://www.ausjeepoffroad.com/forum/...3&postcount=17
Here is is the modified bracket, you can see that the tang that is normally wrapped around to the side of the windshield bracket has been cut off and the bracket has been welded to a replacement wind shield bracket.
Here is the other bracket
And a shot of the spacers the move the top of the snorkel out away from the front bow of the rack, with these fitted the Donaldson pre cleaner is well clear of the rack.
And one of the rear brackets
The rack fitted (sorry I don't have a profile shot)
