[SeaComms]

Procedure To Turn ON (or OFF) The Permanent ESP Disable Feature:
a. Verify that the automatic transmission selector is in the “Park” position, and that a manual transmission is in neutral gear.
b. Shift the transfer case into the 4H range position and ensure parking brake is firmly set.
c. Turn the steering wheel until it is centred and the wheels are pointed straight ahead.
d. Turn ignition on (and optionally start engine to make turning the wheel easier – will work with or without engine running) and wait approximately five (5) seconds for the system bulb check to complete.
e. Turn the steering wheel one-half (½) turn to the right (clockwise).
f. Press and hold the “ESP OFF” button for 7 seconds exactly then release and wait for chime.
g. Turn the steering wheel back to centre, then continue turning the steering wheel one-half (½) turn to the left (counter clockwise).
h. Press and hold the “ESP OFF” button for 7 seconds exactly, release and wait for chime.
i. Turn the steering wheel back to centre.
j. Press and hold the “ESP OFF” button for 7 seconds, release and wait for chime.
k. Cycle the ignition switch to the “OFF” position.


Perfect for sand and mud running