Quote:
Originally Posted by mtd
maybe loosen the mounting bolts while someone else pulls/pushes it straight and re tighten. I cant remember but im pretty sure that most mount holes were slotted.
|
X2 on loosening the mount bolts on that side. You may be lucky & find it goes straight then.
if you have a means to tie that side of the bar down, you could then jack the jeep up with a suitable trolly jack under the frame near the bar mount.
__________________
98&01XJVMs,06&07KJCRD's,No longer question authority,I annoy it.More effect,less effort.10000Club
|