AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - AEV ProCal and Axle Ratios
Thread: AEV ProCal and Axle Ratios
View Single Post
  #2  
Old 28-12-2015
warnabrother's Avatar
warnabrother  warnabrother is offline
Full Flexer
  
Join Date: Oct 2012
Location: Melbourne
Posts: 913
Likes: 43
Liked 113 Times in 66 Posts
Default
No.. when I changed ratios without setting axle ratio I got an error code along the lines of "incorrect axle ratio" or similar and the vehicle went into limp mode.. set the ratios with the Procal and all was good