Ok, got them on in 35deg heatwave for the Great Southern WA, lol
Pretty easy to fit, lay them all out do the measure and set feet, swap out the roof bolts for the threaded bars and check & tighten it all up.
A little dissapointed the "inside" of the mech can be seen as in my 3rd pic.
Good news is no noticeable wind noise until 114klm Per Hour
I'll also need to obtain a PR3014 fitting kit to take the awning bracket bolts.
http://www.ebay.com.au/itm/PRORACK-P...4AAOSwFc5XwQ1F