I also noticed the rear upper control arm bushes were starting to rip apart
So I ordered a pair of complete arms from our favourite supplier
Febest for under $100
The right hand side is pretty straight forward
But the left hand side has fuel tank in the way
There is enough slack in the fuel pipes and wiring
to lower the fuel tank 6 inches to get at that front bolt
The middle sidestep bracket had to be removed too
And someone put a stoopid spring in the way too
(Put the bolts back in the other direction)
If your suspension is lifted like mine,
then the original length arms won't line up
I had the entire weight of the car on the diff housing
Just to push the diff into the right position to install the bolts
Glad I'm not doing this job in the carport
