AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Head Unit Install - 9 inch Android
Thread: Head Unit Install - 9 inch Android
View Single Post
  #8  
Old 11-11-2018
bbmick's Avatar
bbmick  bbmick is offline
I just registered
  
Join Date: Jul 2018
Location: Melbourne
Posts: 14
Likes: 2
Liked 13 Times in 6 Posts
Default
Rob,

This particular unit comes with all wiring included.
It was 100% plug & play. No joining of wires.

I have the premium Boston Acoustics sound with Amp.

The wiring supplied has a canbus decoder, so just plug into standard loom & off it goes. In my case, steering controls @ all. The unit fully works like my old standard one. It stays on until opening door etc etc.

The only issue I had with this unit is no volume control on the actual unit. Have to use SWC, so passenger can't adjust volume.

PS:

I did some homework before my purchase & believe their are a few options to retain the existing system - something "like" the RP4-CH11 kit that PAC Audio make might work for you - not cheap though.
Likes: (2)
Last edited by bbmick; 11-11-2018 at 01:46 PM.