AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Why is it hard to Start when Cold
View Single Post
  #90  
Old 22-03-2019
LuluBelle's Avatar
LuluBelle  LuluBelle is offline
AJOR Bronze
 
Join Date: Apr 2013
Location: Blackall Outback Queensland
Posts: 1,736
Likes: 1,286
Liked 947 Times in 637 Posts
Default

pin 19 to fuel pump relay 86 was 0.25 resistance bugger it seems fine ...............
I will I will I dunno I will do something ?
Beer.O.Clock Now
_____ooooo
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
Edit 1 Beer Later ..... I was just reading stuff about jeeps not starting most of the time it is the crank sensor now I said I tested mine and I am going to retest it again........My Question when I tested the crank sensor I think I got 5 volts on 2 wires middle wire neutral should I get 5 volts going out on the signal wire?..maybe the crank is iffy? I ask this because the plug on the crank sensor is stuffed and when I got the head done the mechanics couldn't get it started they had the crank plugged in reverse would that damage the sensor?
__________________
96 XJ Limited LPG Conversion......
99 XJ Sport ... Finally on the Road
RC Mini Me

Last edited by LuluBelle; 22-03-2019 at 03:55 PM.