AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Reverse Light or Backup Light wiring in Trailer plug
View Single Post
  #3  
Old 27-08-2019
Goneagain's Avatar
Goneagain  Goneagain is offline
Established Member
 
Join Date: Jul 2009
Location: Sydney
Posts: 149
Likes: 2
Liked 6 Times in 5 Posts
Check out my Ride(s)
Default

Hi Steve,

Thank you for your suggestion, when I pulled off the plastic trim in the cargo bay I found the WH/GR wire at the top of the cargo door. but decided that surely its just a loose connection in the wiring harness, If the wire is connected in the socket. It is in the trailer socket and it is a Morpar bar and harness.

Thank you I will rethink and route another wire to the harness.

Best regards, Adrian.

Quote:
Originally Posted by Barboots View Post
Unfortunately reverse is rarely connected by installers Adrian.

You can pick it up in the interior right rear quarter, on top of / behind the wheelarch. It's green/white on MY14, and I believe still the same up to current builds.

Cheers, Steve
__________________
Regards, Goneagain. It's somewhere around here ...
WH2 2018 Trailhawk
WJ 2001 Laredo
ZJ 1998