AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - OBD2 Tips thread
View Single Post
  #7  
Old 15-12-2019
TR Laredo  TR Laredo is online now
Full Flexer
 
Join Date: Aug 2015
Location: Mornington
Posts: 503
Likes: 4
Liked 373 Times in 211 Posts
Check out my Ride(s)
Default

I use BlueDriver on my 2015 Laredo diesel & use the following PID’s to monitor the DPF regen:
01 7A DPF bank 1 delta pressure
01 8B Diesel after treatment status
01 8B Normalised trigger for DPF regen
01 8B Average time between DPF regens

I find the DPF regens between the 68 - 72% mark. Typically I’ll see the soot % level stay the same over approx 5-10km accompanied by a fuel usage increase on the EVIC from 7.4 - 7.5 during the regen. The BlueDriver display has a green graph which will decrease in size once the regen is complete & the soot % will typically drop back to 8.2%. The last regen occurred approx 770 km after the previous one.

cheers

Last edited by TR Laredo; 15-12-2019 at 10:28 AM.