AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Upper front control arm bracket replacement
Thread: Upper front control arm bracket replacement
View Single Post
  #1  
Old 25-01-2020
RPG's Avatar
RPG  RPG is offline
Established Member
  
Join Date: Dec 2014
Location: Wodonga Victoria
Posts: 180
Likes: 2
Liked 42 Times in 30 Posts
Default Upper front control arm bracket replacement
Has anyone replaced the drivers side front upper control an bracket on the axel housing? After close inspection of mine the previous owner must have replaced the bush and in doing so damaged the bracket or the bush was a poor fit so they placed a few very daggy welds on the inside tacking the bush to the bracket. I have found several on line, none in Australia so far. There several different types, are any better than the others. Do I go with one that takes a standard bush or has any one upgraded to the rubicon express super flex joint. I guess if I go the super flex option I should also replace the passenger side bush too. I am already running the rubicon express arms top and bottom. As usual any thoughts or experiences greatly appreciated.