AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Problems with Ironman Lift, 2014 WK2
View Single Post
  #54  
Old 03-03-2021
drover's Avatar
drover  drover is offline
MonsterMoose
 
Join Date: Apr 2005
Location: QLD
Age: 70
Posts: 8,896
Likes: 4,428
Liked 3,949 Times in 2,330 Posts
Default

Quote:
Originally Posted by Das View Post
Thanks Drover. Yes I replaced the front struts and springs. Rear springs with Nivomat shocks still. Complete Ironman kit. My measurements from centre wheel to top of guard are Front - 495 and Rear - 550 now. I put Falken Wildpeak AT3's on front in 275/65 R18 so not sure if the bigger tyre affects measurements??

I took my WK2 into Ironman today and they took it for a drive and heard the knocking. Checked and tightened everything and it fixed it. Whisper quiet now with no knocks. I hope it doesn't start again as I guess it means something is loosening.
I would say the clunking might have been just the strut mount bolts needed a tighten up, once that bedded in, common enough.
Measuring from hub centre to bottom of guard means no matter what the tyre the measurement will be the same for all vehicles.
__________________
2015 WK2 CRD Laredo( ZG, WG 2.7 )

Your Never Too Old To Learn Something Stupid.
Likes: (1)
Das